Error in the driver the ethernet.

[jailsonjoseleitesilva]

I updated my server to 7.4.16 and now the system keeps reporting this error
[Sep26 08:20] i40e 0000:1a:00.2: failed to get phy cap., ret = I40E_ERR_UNKNOWN_PHY last_status = I40E_AQ_RC_EIO
Network cards crash and only work again after a reboot

Need help

My Network cards

Network: Device-1: Intel Ethernet X722 for 10GBASE-T driver: i40e v: 2.23.17 port: 2000 bus ID: 1a:00.0
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> scope: global
IP v6: <filter> scope: link
Device-2: Intel Ethernet X722 for 10GBASE-T driver: i40e v: 2.23.17 port: 2000 bus ID: 1a:00.1
IF: eno2 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v6: <filter> scope: link
Device-3: Intel Ethernet X722 for 10GbE SFP+ driver: i40e v: 2.23.17 port: 2000 bus ID: 1a:00.2
IF: eno3 state: down mac: <filter>
Device-4: Intel Ethernet X722 for 10GbE SFP+ driver: i40e v: 2.23.17 port: 2000 bus ID: 1a:00.3
IF: eno4 state: down mac: <filter>
Device-5: Intel I350 Gigabit Network driver: igb v: kernel port: 2000 bus ID: af:00.0
IF: enp175s0f0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-6: Intel I350 Gigabit Network driver: igb v: kernel port: 2000 bus ID: af:00.1
IF: enp175s0f1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-7: Intel I350 Gigabit Network driver: igb v: kernel port: 2000 bus ID: d8:00.0
IF: enp216s0f0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-8: Intel I350 Gigabit Network driver: igb v: kernel port: 2000 bus ID: d8:00.1
IF: enp216s0f1 state: up speed: 1000 Mbps duplex: full mac: <filter>