command 'systemctl start pve-container@100' failed: exit code 1

J

JakeC

Active Member
May 15, 2017
8
0
41
44
Did a clean/fresh install of teh PVE 5.2 iso.
Started restoring the kvms and containers.

VMs restored fine.
Container "appeared" to restore fine.

However when I go to start the container:
command 'systemctl start pve-container@100' failed: exit code 1

Logs and versions below.
So I tried to create a fresh container, but no templates are listed during the creation process:
upload_2018-6-16_12-4-51.png

But I do seem them in local:
upload_2018-6-16_12-5-15.png

I am not sure if these are related or not.

Following some other threads, I made sure the pve no sub repo was in the source list, I disabled the subscription one, and ran apt-get update and then apt-get full-upgrade.

Still no luck.

Any thoughts would be greatly appreciated!

Looking at the service status:
Jun 16 11:48:40 pve systemd[1]: Starting PVE LXC Container: 100...
Jun 16 11:48:40 pve lxc-start[3918]: lxc-start: 100: lxccontainer.c: wait_on_daemonized_start: 815 No such file or directory - Failed to receive the container state
Jun 16 11:48:40 pve lxc-start[3918]: The container failed to start.
Jun 16 11:48:40 pve lxc-start[3918]: To get more details, run the container in foreground mode.
Jun 16 11:48:40 pve lxc-start[3918]: Additional information can be obtained by setting the --logfile and --logpriority options.
Jun 16 11:48:40 pve systemd[1]: pve-container@100.service: Control process exited, code=exited status=1
Jun 16 11:48:40 pve systemd[1]: Failed to start PVE LXC Container: 100.
Jun 16 11:48:40 pve systemd[1]: pve-container@100.service: Unit entered failed state.
Jun 16 11:48:40 pve systemd[1]: pve-container@100.service: Failed with result 'exit-code'.

root@pve:/etc/apt/sources.list.d# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

root@pve:/etc/apt/sources.list.d# pveversion -v
proxmox-ve: 5.2-2 (running kernel: 4.15.17-3-pve)
pve-manager: 5.2-2 (running version: 5.2-2/b1d1c7f4)
pve-kernel-4.15: 5.2-3
pve-kernel-4.15.17-3-pve: 4.15.17-12
pve-kernel-4.15.17-1-pve: 4.15.17-9
corosync: 2.4.2-pve5
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.0-8
libpve-apiclient-perl: 2.0-4
libpve-common-perl: 5.0-32
libpve-guest-common-perl: 2.0-16
libpve-http-server-perl: 2.0-9
libpve-storage-perl: 5.0-23
libqb0: 1.0.1-1
lvm2: 2.02.168-pve6
lxc-pve: 3.0.0-3
lxcfs: 3.0.0-1
novnc-pve: 1.0.0-1
proxmox-widget-toolkit: 1.0-18
pve-cluster: 5.0-27
pve-container: 2.0-23
pve-docs: 5.2-4
pve-firewall: 3.0-11
pve-firmware: 2.0-4
pve-ha-manager: 2.0-5
pve-i18n: 1.0-6
pve-libspice-server1: 0.12.8-3
pve-qemu-kvm: 2.11.1-5
pve-xtermjs: 1.0-5
qemu-server: 5.0-28
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.9-pve1~bpo9
root@pve:/etc/apt/sources.list.d# cd /



root@pve:/# /usr/bin/lxc-start -n 100 -F -lDEBUG -o /dev/shm/err.log --logpriority TRACE
lxc-start: 100: conf.c: run_buffer: 347 Script exited with status 2
lxc-start: 100: start.c: lxc_init: 815 Failed to run lxc.hook.pre-start for container "100"
lxc-start: 100: start.c: __lxc_start: 1849 Failed to initialize container "100"
The container failed to start.
Additional information can be obtained by setting the --logfile and --logpriority options.




root@pve:/# cat /dev/shm/err.log
lxc-start 100 20180616155248.243 TRACE lxc_commands - commands.c:lxc_cmd:311 - Connection refused - Command "get_init_pid" failed to connect command socket
lxc-start 100 20180616155248.243 TRACE lxc_commands - commands.c:lxc_cmd:311 - Connection refused - Command "get_cgroup" failed to connect command socket
lxc-start 100 20180616155248.243 TRACE lxc_commands - commands.c:lxc_cmd:311 - Connection refused - Command "get_state" failed to connect command socket
lxc-start 100 20180616155248.243 TRACE lxc_commands - commands.c:lxc_cmd_init:1291 - Creating abstract unix socket "/var/lib/lxc/100/command"
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_init_handler:714 - Unix domain socket 4 for command server is ready
lxc-start 100 20180616155248.243 INFO lxc_lsm - lsm/lsm.c:lsm_init:46 - LSM security driver AppArmor
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_init:731 - Initialized LSM
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .reject_force_umount # comment this to allow umount -f; not recommended
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:761 - Adding native rule for reject_force_umount # comment this to allow umount -f; not recommended action 0(kill)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:do_resolve_add_rule:411 - Setting Seccomp rule to reject force umounts
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:765 - Adding compat rule for reject_force_umount action 0(kill)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:do_resolve_add_rule:411 - Setting Seccomp rule to reject force umounts
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:do_resolve_add_rule:411 - Setting Seccomp rule to reject force umounts
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .[all]
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .kexec_load errno 1
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:761 - Adding native rule for kexec_load errno 1 action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:765 - Adding compat rule for kexec_load action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .open_by_handle_at errno 1
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:761 - Adding native rule for open_by_handle_at errno 1 action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:765 - Adding compat rule for open_by_handle_at action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .init_module errno 1
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:761 - Adding native rule for init_module errno 1 action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:765 - Adding compat rule for init_module action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .finit_module errno 1
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:761 - Adding native rule for finit_module errno 1 action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:765 - Adding compat rule for finit_module action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:585 - processing: .delete_module errno 1
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:761 - Adding native rule for delete_module errno 1 action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:765 - Adding compat rule for delete_module action 327681(errno)
lxc-start 100 20180616155248.243 INFO lxc_seccomp - seccomp.c:parse_config_v2:775 - Merging in the compat Seccomp ctx into the main one
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_init:738 - Read seccomp policy
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_serve_state_clients:423 - Set container state to STARTING
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_serve_state_clients:426 - No state clients registered
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_init:746 - Set container state to "STARTING"
lxc-start 100 20180616155248.243 TRACE lxc_start - start.c:lxc_init:811 - Set environment variables
lxc-start 100 20180616155248.243 INFO lxc_conf - conf.c:run_script_argv:368 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "100", config section "lxc"
lxc-start 100 20180616155248.528 DEBUG lxc_conf - conf.c:run_buffer:338 - Script exec /usr/share/lxc/hooks/lxc-pve-prestart-hook 100 lxc pre-start with output: directory '/lxcshare' does not exist

lxc-start 100 20180616155248.533 ERROR lxc_conf - conf.c:run_buffer:347 - Script exited with status 2
lxc-start 100 20180616155248.533 ERROR lxc_start - start.c:lxc_init:815 - Failed to run lxc.hook.pre-start for container "100"
lxc-start 100 20180616155248.533 TRACE lxc_start - start.c:lxc_serve_state_clients:423 - Set container state to ABORTING
lxc-start 100 20180616155248.533 TRACE lxc_start - start.c:lxc_serve_state_clients:426 - No state clients registered
lxc-start 100 20180616155248.533 ERROR lxc_start - start.c:__lxc_start:1849 - Failed to initialize container "100"
 
Sorry, just realized why the templates aren't there, haven't downloaded them yet :)
Forgot I have to do that on a fresh install (its been a while had 4.x running for a long time)

Original issue still remains though with starting a restored lxc container.

Thank you in advance for any assistance.
 
Looks like it was an issue with that one particular lxc archive.
No idea what happened there, but the rest of the containers restored and started properly.

Thank you,
Jake
 
Hello,

Did a clean/fresh install of teh PVE 5.2 iso.
Started restoring the kvms and containers.

VMs restored fine.
Container "appeared" to restore fine.

However when I go to start the container:
command 'systemctl start pve-container@100' failed: exit code 1

Log:
root@pve:/# lxc-start -n 110 -F -lDEBUG -o /tmp/err.log --logpriority TRACE
lxc-start: 110: network.c: instantiate_veth: 105 File exists - Failed to create veth pair "veth110i0" and "vethDRT7AN"
lxc-start: 110: network.c: lxc_create_network_priv: 2446 Failed to create network device
lxc-start: 110: start.c: lxc_spawn: 1616 Failed to create the network
lxc-start: 110: start.c: __lxc_start: 1948 Failed to spawn container "110"
lxc-start: 110: tools/lxc_start.c: main: 330 The container failed to start
lxc-start: 110: tools/lxc_start.c: main: 336 Additional information can be obtained by setting the --logfile and --logpriority options


root@pve:/#cat /tmp/err.log
lxc-start 110 20180928105806.584 TRACE commands - commands.c:lxc_cmd:312 - Connection refused - Command "get_init_pid" failed to connect command socket
lxc-start 110 20180928105806.584 TRACE commands - commands.c:lxc_cmd:312 - Connection refused - Command "get_state" failed to connect command socket
lxc-start 110 20180928105806.584 TRACE commands - commands.c:lxc_cmd_init:1294 - Creating abstract unix socket "/var/lib/lxc/110/command"
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_init_handler:729 - Unix domain socket 4 for command server is ready
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_start:2061 - Doing lxc_start
lxc-start 110 20180928105806.584 INFO lsm - lsm/lsm.c:lsm_init:47 - LSM security driver AppArmor
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_init:746 - Initialized LSM
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:get_new_ctx:456 - Added arch 2 to main seccomp context
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:get_new_ctx:464 - Removed native arch from main seccomp context
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:get_new_ctx:456 - Added arch 3 to main seccomp context
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:get_new_ctx:464 - Removed native arch from main seccomp context
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:get_new_ctx:469 - Arch 4 already present in main seccomp context
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "reject_force_umount # comment this to allow umount -f; not recommended"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:do_resolve_add_rule:503 - Set seccomp rule to reject force umounts
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:934 - Added native rule for arch 0 for reject_force_umount action 0(kill)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:do_resolve_add_rule:503 - Set seccomp rule to reject force umounts
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:943 - Added compat rule for arch 1073741827 for reject_force_umount action 0(kill)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:do_resolve_add_rule:503 - Set seccomp rule to reject force umounts
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:953 - Added compat rule for arch 1073741886 for reject_force_umount action 0(kill)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:do_resolve_add_rule:503 - Set seccomp rule to reject force umounts
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:963 - Added native rule for arch -1073741762 for reject_force_umount action 0(kill)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "[all]"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "kexec_load errno 1"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:934 - Added native rule for arch 0 for kexec_load action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:943 - Added compat rule for arch 1073741827 for kexec_load action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:953 - Added compat rule for arch 1073741886 for kexec_load action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:963 - Added native rule for arch -1073741762 for kexec_load action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "open_by_handle_at errno 1"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:934 - Added native rule for arch 0 for open_by_handle_at action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:943 - Added compat rule for arch 1073741827 for open_by_handle_at action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:953 - Added compat rule for arch 1073741886 for open_by_handle_at action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:963 - Added native rule for arch -1073741762 for open_by_handle_at action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "init_module errno 1"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:934 - Added native rule for arch 0 for init_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:943 - Added compat rule for arch 1073741827 for init_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:953 - Added compat rule for arch 1073741886 for init_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:963 - Added native rule for arch -1073741762 for init_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "finit_module errno 1"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:934 - Added native rule for arch 0 for finit_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:943 - Added compat rule for arch 1073741827 for finit_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:953 - Added compat rule for arch 1073741886 for finit_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:963 - Added native rule for arch -1073741762 for finit_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:757 - Processing "delete_module errno 1"
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:934 - Added native rule for arch 0 for delete_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:943 - Added compat rule for arch 1073741827 for delete_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:953 - Added compat rule for arch 1073741886 for delete_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:963 - Added native rule for arch -1073741762 for delete_module action 327681(errno)
lxc-start 110 20180928105806.584 INFO seccomp - seccomp.c:parse_config_v2:967 - Merging compat seccomp contexts into main context
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:parse_config_v2:977 - Merged first compat seccomp context into main context
lxc-start 110 20180928105806.584 TRACE seccomp - seccomp.c:parse_config_v2:993 - Merged second compat seccomp context into main context
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_init:753 - Read seccomp policy
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_serve_state_clients:431 - Set container state to STARTING
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_serve_state_clients:434 - No state clients registered
lxc-start 110 20180928105806.584 TRACE start - start.c:lxc_init:761 - Set container state to "STARTING"
lxc-start 110 20180928105806.585 TRACE start - start.c:lxc_init:824 - Set environment variables
lxc-start 110 20180928105806.585 INFO conf - conf.c:run_script_argv:374 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "110", config section "lxc"
lxc-start 110 20180928105807.426 TRACE start - start.c:lxc_init:831 - Ran pre-start hooks
lxc-start 110 20180928105807.426 TRACE start - start.c:setup_signal_fd:332 - Created signal file descriptor 5
lxc-start 110 20180928105807.426 TRACE start - start.c:lxc_init:842 - Set up signal fd
lxc-start 110 20180928105807.427 DEBUG terminal - terminal.c:lxc_terminal_peer_default:711 - Using terminal "/dev/tty" as proxy
lxc-start 110 20180928105807.427 DEBUG terminal - terminal.c:lxc_terminal_signal_init:189 - Created signal fd 9
lxc-start 110 20180928105807.427 DEBUG terminal - terminal.c:lxc_terminal_winsz:87 - Set window size to 317 columns and 87 rows
lxc-start 110 20180928105807.427 TRACE start - start.c:lxc_init:850 - Created console
lxc-start 110 20180928105807.427 TRACE start - start.c:lxc_init:857 - Chowned console
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1030 - basecginfo is:
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1031 - 12:freezer:/
11:blkio:/init.scope
10:devices:/init.scope
9:perf_event:/
8:memory:/init.scope
7:pids:/init.scope
6:net_cls,net_prio:/
5:cpu,cpuacct:/init.scope
4:rdma:/
3:hugetlb:/
2:cpuset:/
1:name=systemd:/init.scope

lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 0: freezer
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 1: blkio
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 2: devices
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 3: perf_event
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 4: memory
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 5: pids
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 6: net_cls
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 7: net_prio
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 8: cpu
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 9: cpuacct
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 10: rdma
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 11: hugetlb
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1034 - kernel subsystem 12: cpuset
lxc-start 110 20180928105807.427 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_basecg_debuginfo:1037 - named subsystem 0: name=systemd
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:cg_hybrid_init:2477 - Writable cgroup hierarchies:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1011 - Hierarchies:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 0: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/systemd
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: name=systemd
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 1: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/cpuset
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: cpuset
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 2: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/hugetlb
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: hugetlb
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 3: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/rdma
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: rdma
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 4: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/cpu,cpuacct
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: cpu
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 1: cpuacct
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 5: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/net_cls,net_prio
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: net_cls
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 1: net_prio
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 6: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/pids
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: pids
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 7: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/memory
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: memory
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 8: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/perf_event
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: perf_event
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 9: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/devices
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: devices
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 10: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/blkio
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: blkio
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1016 - 11: base_cgroup: /
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1017 - mountpoint: /sys/fs/cgroup/freezer
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1018 - controllers:
lxc-start 110 20180928105807.428 TRACE cgfsng - cgroups/cgfsng.c:lxc_cgfsng_print_hierarchies:1020 - 0: freezer
lxc-start 110 20180928105807.428 TRACE cgroup - cgroups/cgroup.c:cgroup_init:51 - Initialized cgroup driver cgfsng
lxc-start 110 20180928105807.428 TRACE cgroup - cgroups/cgroup.c:cgroup_init:54 - Running with legacy cgroup layout
lxc-start 110 20180928105807.428 TRACE start - start.c:lxc_init:864 - Initialized cgroup driver
lxc-start 110 20180928105807.428 TRACE start - start.c:lxc_init:871 - Initialized LSM
lxc-start 110 20180928105807.428 INFO start - start.c:lxc_init:873 - Container "110" is initialized
lxc-start 110 20180928105807.428 ERROR network - network.c:instantiate_veth:105 - File exists - Failed to create veth pair "veth110i0" and "vethDRT7AN"
lxc-start 110 20180928105807.428 ERROR network - network.c:lxc_create_network_priv:2446 - Failed to create network device
lxc-start 110 20180928105807.428 ERROR start - start.c:lxc_spawn:1616 - Failed to create the network
lxc-start 110 20180928105807.428 ERROR start - start.c:__lxc_start:1948 - Failed to spawn container "110"
lxc-start 110 20180928105807.428 TRACE start - start.c:lxc_serve_state_clients:431 - Set container state to STOPPING
lxc-start 110 20180928105807.428 TRACE start - start.c:lxc_serve_state_clients:434 - No state clients registered
lxc-start 110 20180928105807.428 TRACE start - start.c:lxc_fini:983 - Closed command socket
lxc-start 110 20180928105807.428 TRACE start - start.c:lxc_fini:994 - Set container state to "STOPPED"
lxc-start 110 20180928105807.428 INFO conf - conf.c:run_script_argv:374 - Executing script "/usr/share/lxc/hooks/lxc-pve-poststop-hook" for container "110", config section "lxc"
lxc-start 110 20180928105808.741 INFO conf - conf.c:run_script_argv:374 - Executing script "/usr/share/lxcfs/lxc.reboot.hook" for container "110", config section "lxc"
lxc-start 110 20180928105809.243 ERROR lxc_start - tools/lxc_start.c:main:330 - The container failed to start
lxc-start 110 20180928105809.244 ERROR lxc_start - tools/lxc_start.c:main:336 - Additional information can be obtained by setting the --logfile and --logpriority options

root@pve# pveversion -v
proxmox-ve: 5.2-2 (running kernel: 4.15.18-5-pve)
pve-manager: 5.2-9 (running version: 5.2-9/4b30e8f9)
pve-kernel-4.15: 5.2-8
pve-kernel-4.15.18-5-pve: 4.15.18-24
pve-kernel-4.15.17-1-pve: 4.15.17-9
corosync: 2.4.2-pve5
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.0-8
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-38
libpve-guest-common-perl: 2.0-18
libpve-http-server-perl: 2.0-11
libpve-storage-perl: 5.0-29
libqb0: 1.0.1-1
lvm2: 2.02.168-pve6
lxc-pve: 3.0.2+pve1-2
lxcfs: 3.0.2-2
novnc-pve: 1.0.0-2
proxmox-widget-toolkit: 1.0-20
pve-cluster: 5.0-30
pve-container: 2.0-27
pve-docs: 5.2-8
pve-firewall: 3.0-14
pve-firmware: 2.0-5
pve-ha-manager: 2.0-5
pve-i18n: 1.0-6
pve-libspice-server1: 0.12.8-3
pve-qemu-kvm: 2.11.2-1
pve-xtermjs: 1.0-5
qemu-server: 5.0-35
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.11-pve1~bpo1


Thank you in advance for any assistance.
 
Last edited:
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back