Can you add a ssd/hd to a proxmox system without rebooting ?

[Cdnr1]

I've added an SSD and a hard drive, but Proxmox doesn't detects them.
Proxmox detects the hard drive and SSD when I reboot, but is there no way to scan for new disks without rebooting?

 

[bbgeek17]

The underlying OS of Proxmox is Debian Linux. Linux works great with hot-pluggable disks IF the hardware platform properly supports this. Many older ones do not.
Check your "dmesg" after the disk is plugged - are there any messages about device arriving? If not, then its a hardware/bios/firmware issue that you may or may not be able to solve.

Good luck

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[Kingneutron]

I've added an SSD and a hard drive, but Proxmox doesn't detects them.
Proxmox detects the hard drive and SSD when I reboot, but is there no way to scan for new disks without rebooting?

https://unix.stackexchange.com/ques...w-hard-disk-attached-without-rebooting#500280

 

[bbgeek17]

https://unix.stackexchange.com/ques...w-hard-disk-attached-without-rebooting#500280

Op has SSD, that will be either PCI or SATA, not SCSI. The former two are either hot-pluggable or not.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox