Hello everybody!
EDIT: This tool is now included "Proxmox Toolbox" - Edited this post in order to update path and links.
As beginner, i had some difficulties getting Proxmox e-mail settings configuration up and running.
I recently wrote a little script to get the configuration done with ease...
Hey. I noticed a strange one. Added 8 GB of RAM to the virtual machine. And inside she sees only 7.8 GB. What could be the problem? Virtual Machine is Ubuntu 16.04
Machine configuration
agent: 1
boot: c
bootdisk: scsi0
cores: 4
cpu: host
hotplug: disk,network,usb
machine: q35
memory: 8192
name...
Hi evryone this is my firrst time ;)
My english is'n native so... mayby you uderstand me... or not ;)
1. My node has 4xNIC 1GB and 2xNIC 10GB
2. I use 1x1GB for mgmt+data, 1x10GB for Backup, 1x10GB Ceph
Working network configuration:
auto lo
iface lo inet loopback
auto eno1
iface eno1 inet...
Hello All,
We got the problem when i try to restart the pvedaemon service and i found below message in the syslog. We got the problem the host disconnect suddenly from the cluster. I not sue it is related to the pvedaemon or not. Thank you.
Restart message:
command 'systemctl restart...
I have 2 NIC's on a Dell R610 one is using IP 98.179.240.a going to 1 Vm, fully functional and the other IP 98.179.240.b I would like to configure to anther vm
they both have the same subnet, Gateway and DNS settings both are Linux Servers 18.04. how is this done, my modem has one port bridge...
Hi,
I've created an account on the server but would like to ensure I open up all the necessary ports so that I can use Ansible to configure and ssh to access the console itself.
Not speaking of the individual VM's. That's not a problem. But the server.
Can someone refer me to the right...
I have had long discussions with @tim about my 6.0.9 missconfigured interface file.
Now I have set up a new config and I need to reality check this one, so that is why I turn to this hive of knowledge.
Hello,
Recently, i migrate my server on proxmox to learn how it works and to see something other than Vmware.
However, I've a connectivity problem on my pfsense LAN, OPT... Pfsense being a vm on my server without vlan settings into web interface
My lan network can’t get out of pfsense.
ping...
HI,
I use API interface to manage VMs.
I have a process that clone the collected VM ID into a new POOL.
Some cloned VM will not be in the POOL.
I use workaround. After the clone processes I check which VM located in the POOL. I add the missing VMs.
But the Pool members responses sometimes not...
This is my first time running my own virtualization environment. PVE looks like the best option. I'd like to get some advice on setting it up.
I have a Supermicro box (HW RAID 1 available) with the following config
2x WD Red 4TB drives
1x 2TB NVME SSD
1x Xeon E 2136
2X 16GB RAM
2X 1Gbps NICs
5...
Version: 5.2-2
in /var/lib/pmg/templates/postgresql.conf.in there are two timezone related parameters (timezone and log_timezone) with the default value of 'localtime'. When running without modification the PostgreSQL service fails to start.
2019-05-14 20:21:08.941 GMT [745] LOG: invalid...
Hello,
I am trying to understand what is going on, but unfortunately I cannot find the cause. To keep this issue description short, I made a new installation of Proxmox 5.3.8 using the following hardware:
Specs:
CPU: Intel Xeon E5-1650v3 - 6c/12t - 3.5GHz
RAM: 128GB DDR4 ECC 2133 MHz
Disks...
Hi,
in the Ceph configuration file /etc/ceph/ceph.conf you define a non-standard path for parameter "keyring" in section global:
root@ld4257:/# more /etc/ceph/ceph.conf
[global]
auth client required = cephx
auth cluster required = cephx
auth service required = cephx...
Hi!,
I'm running a single node install on an old laptop using lvm and ext4. I would like to disable the zfs module and all related processes to conserve my limited resources. How do I do that?
So I have my cluster up and running then the other day one of my LXC container had an issue and crashed - I am not sure how but now the configuration file is on one node (node 2) and the raw container image is on another (node 3). I am unable to start the container on either node (presumably...
HI, i have cluster with 5 server with ceph.
Ceph cluster was installed on proxmox 5.0 and after some time proxmox was updated to 5.2.
One of the thing what change this is that after update ti 5.2 ceph storage device in inventory start show not RAW space, but already useful space (divided for...
Hello,
I want to make some changes in the configuration file of LXC Centos container.
I changed this file "lxc-centos" (in /usr/share/lxc/templates) and I did reboot server but it did not work.
Could you specify the location of this file?
Thanks
Hi, I'd like to install 4 proxmox VMs on a VMware
What VM settings should I use If I want to the VMs to have their own private network (192.160.100.100) but be able to be pinged by the host computer? I want each Vm to have 2 NICS. Which two NICs should I use? NAT and "host only" or NAT...
Here is what I got. Host server with 96GB ram. Installed Proxmox 4 on it and created 1 VM (CentOS 7) with allotted 65GB ram and 1 LXC (MySQL tempalte) with 1GB allotted ram. From control panel it shows that CentOS 7 vm is using 3.5GB ram and LXC is using 77MB or ram. When I logged in to control...
Hi there, is it possible to change the default LXC container configs so that they support docker? I can go into each container manually but I create a lot of containers so is it possible to do so?
Currently I do this:
cd /etc/pve/lxc
nano 100.conf
Then I add these lines:
lxc.aa_profile...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.