I am checking the configuration of the updates in /etc/apt/sources.list using nano.
I am unable to exit the nano console because the Control character is not caught by the console: when I type CTRL + X to exit the page, it types a 'X' instead.
Please note:
I have installed PBS in a VM
within...
Hi,
For some reason I still do not understand, one of the three nodes in my cluster did not mount yesterday and is still down.
After some research, I ended up narrowing down the issue to a network issue.
So:
I have ifupdown2 installed
I checked the connection to the switch > OK
I did a dmesg |...
Hello,
i experienced that on each node nfs shares are still available after removing a nfs share in the datacenter > storage configuration.
There is still a open bug report (https://bugzilla.proxmox.com/show_bug.cgi?id=1016)
My solution was to unmount the storage on each node, after i had done...
Hi,
I just update one of my proxmox VE server:
$ pveversion
pve-manager/6.2-15/48bd51b6 (running kernel: 5.4.65-1-pve)
And I tried to "terraform" a VM on it. I found something very weird with the api result.
step to reproduce:
* have a stopped VM
* $ pvesh create...
I have a problem right now where I tried to restore a VM to a backup that has been completing successfully, but upon restore shows as corrupted.
The backup is via gzip to a NFS-mounted directory within a Proxmox node running the latest updates (Virtual Environment 6.2-11, kernel 6.2-5). The VM...
There is a backup taking 12h+, which is okay. GC is daily.
Now, GC isn't happy when trying to clean up files of an active backup:
2020-08-23T18:34:00+02:00: starting garbage collection on store pub
2020-08-23T18:34:00+02:00: task triggered by schedule 'daily'
2020-08-23T18:34:00+02:00: Start...
Hi, after upgrade to 6.2-9 and 6.2-10, the backup UI in PVE show the backups from other VMs with higher ID but same prefix. Can anyone confirm this?
Dan
Describing here a problem encountered. noteworthy is previously there were hugepages configured with the VM running and these were subsequently removed. Proxmox did not catch this imho.
Booting a VM where the CPU configuration had pdpe1gb flag enabled this appeared to have resulted in initially...
Hey guys, I think there is a bug @ PVE's firewall when doing vlans.
Here's my setup:
Home "server" - PVE 6.2-4 - only has 1 Ethernet interface.
1. Mikrotik router connected to fiber-ONT bridged port - gets an external IP via DHCP and does nat / masq on 192.168.100.0/24 for the internal...
A fresh installation of PVE 6.2 from the official ISO, during the installation, the ethernet cable was plugged into the first ethernet port. The network was detected, configured and the installation finished successfully.
After rebooting into the installed system, there is no network...
* New installation on the server, on the first disk. No problem. Reboot. Connecting to WebGUI - OK.
* Also, i am connect via ssh, from the remaining disks I create Soft RAID 6( don't ask why, it just happened))) ). The result is a raid disk of more than 4 Tb (/dev/md0).
* Next. I make :
pvcreate...
Hallo,
ich habe gerade einen Proxmox Server installiert.
Ich kann über das Webinterface nicht auf dessen Konsole zugreifen.
Fehler:
timed out waiting for client
TASK ERROR: command '/usr/bin/termproxy 5900 --path /nodes/Proxmox --perm Sys.Console -- /bin/login -f root' failed: exit code 4...
I have the problem that if I don't log in to the webinterface for a day or more, I only see grey question marks and the server doesn't respond to any of my input.
I have to restart the server manually to get it working again. rebooting via ssh is not possible either.
if i want to find out what...
Hallo,
ich habe mir gerade einen TeamSpeak-Server aufgesetzt. Hat alles gut funktioniert.
Dann habe ich auf der Konsole einfach ein paar mal "exit" eingegeben -> Server tot und kann nicht rebootet werden -> Proxmox sagt Code 1 und Filedirectory nicht vorhanden.
Das ist replezierbar!
Noch...
Hallo,
ich habe ein ziemlich komisches Problem...
Wenn ich mich nach einem Tag auf das Proxmox Webinterface schalte, hängt das komplett und funktioniert nicht.
Bei meinen laufenden VM's werden nur graue Fragezeichen angezeigt und auch sonst kann man nichts machen.
Auch wenn ich auf...
I have a (possibly unrelated) problem where one cluster member's TOTEM keep generateing retransmits from other nodes or local timeouts. When I checked nodeC kept joining and leaving the cluster, about 50 per seconds. Restarting corosync resulted the same.
It turned out however that on other...
Hello,
I'm running the following configuration: ASUS Prime TRX40-PRO (BIOS Version 0702 2019/12/17 - latest available), Threadripper 3960x, 32 Gig ddr4, 1TB NVME, nVidia 1070ti.
Last night I tried to install PVE 6.1-1 - as soon as I select install (or debug install with quiet disabled) - PVE...
Hi there,
i am currently testing ZFS instead of my "old" setup (mdadm raid) and wanted to start the usual backup cycle.
My Qemu-VMs will get backuped perfectly, my LXCs won't.
Here is the log:
Virtual Environment 6.1-3
Search
Datacenter
Server View
Logs
()
INFO: starting new backup job...
Whenever I start my Proxmox Server it ask me to press F1 to Continue and F2 to delete
Is there any way to stop this or am I doing anything wrong or the installation went wrong??
Everything is working fine but this is the issue I'm facing everyday when I start my Server.
Currently I'm using...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.