Search results

Hi! After successfully adding a proxmox5 Node to my cluster, i adapted the udev rules (/etc/udev/rules.d) to what the old server with PROXMOX 4 was configured. I have 3 USB HDD's used for copying Backups to a second location. My udev rule is this one...

Hi! We are using a 5 node proxmox 4.2 cluster with several VM's. Now i want to upgrade to proxmox 5 and read in the wiki that it should be possible to ADD a Proxmox 5 node to the existing Proxmox 4.2 cluster. I just want to make sure i am right with my view of the procedure. Plan is as...

hi! I have a server with usb3.0 and a toshiba external USB3.0 harddisk. Tried to edit config of vm with values: usb0: hostusb=0480:a006 But then the vm (windows7) says "unknown device" and i can nit use the disk I read in the wiki about passing USB3.0 devices to vm and tried the line (from...

Hi i have a proxmox cluster 3.4 with 3 nodes. 2 of them have glusterfs-server installed and share a 16TB volume. Each server is connected to a 10Gb switch with a single 10Gb nic Local writes to the mounted raid 5 partiotion can be done with about 450 MB/sec I configured glusterfs as storage...

Hi As my tests went on and i visited the Cebit yesterday, i think my actual setup is the best i can get with the hardware i have. Dear Proxmox team, please answer the questions below: 1) I have a proxmox cluster with 3 nodes, 2 of them are really big (2 XeonV3 12 core, 256GB RAM, 1 Raid 1 for...

Yes, it does. Problem was, when shipped gluster is configured, and already used, there seems to be problems when you then upgrade to gluster.org packages. One should FIRST of all add the gluster repository, upgrade gluster and install gluster-server before doing anything else

some news for all who are interested: I installed proxmox 3.4 from scratch. then edited the repos for using glusterfs from gluster.org. You can do: wget -O - http://download.gluster.org/pub/gluster/glusterfs/3.6/3.6.2/Debian/wheezy/pubkey.gpg | apt-key add - then echo deb...

thank you. i tried virtio for a windows system harddisk but it has some strange behaviour. i will leave it with ide.

Hi! I have a windows 2008 R2 Server (64 bit) in a kvm vm. I tested harddisk with hd-tune and got about 150 MB/s. This harddisk is an IDE one. Now i added a second harddsik, SATA and tested this disk also with hd-tune. Here i got 250 MB/s which is really good. I powered off the vm and removed...

Hi Dietmar. I used the binary packages from gluster org for wheezy. THe gluster is working well, but the proxmox webinterface seems not to be able to mount the volumes. The volumes are shown, but not mounted and i don't know how to debug this. From commandline, the gluster is working very well...

Hi Dietmar. I don't think it is glusterfs realted, because before doing a restore, i copied 4 TB(!) of vm backups to the glusterfs from an NFS mounted store (old fileserver) with no errormessages. I only get the errors when using the WebUI to restore the backups or from commandline using...

I just started from scratch, reinstalled 3 Servers with proxmox 3.4 and updated all nodes via terminal. Then i built a cluster and installed glusterfs-server (3.5.2-1) via wget command. 2 of the nodes have a 18 TB raid 5 which is now used for gluster. after configuring gluster ist working fine...

Hi! Just built a new cluster with 3 nodes (proxmox 3.4) i built a glusterfs on 2 of the nodes and configured a replica 2 gluster. So far so well. I added the glusterfs in webUI and connected another NFS Share from a NAS. Now i wanted to restore a backup (from NAS) to the glusterfs storage. I...

Hi! I am running a proxmox cluster with 4 nodes. on one node i am running an openvz ubuntu 8.04 (from proxmox-template) on the nodes LOCAL storage which runs since months very fine. All graphs are displayed (CPU, Memory, Network, DIsk I/O) Now i installed a new openvz to get an actual os...

Hi! Yesterday i was doing an dist-upgrade in proxmox 3.2. Now the webinterface is missing the nodes. Any advice?

Hi i have a question regarding the clusterconfiguration. Actual i am running a cluster proxmox 2.3 with one NFS Share on which all vm images reside. Now i want to build a new cluster with proxmox 3. The goal is to migrate the old one to the 3.x cluster Is it possible to install a new server...

so what do you mean exactly? I have to boot a live cd, and from the live cd i have to make a dir, then somehow mount /dev/sda2 (which is a LVM2 volume) and the /dev/sda1 (boot) and then chroot into the dir and uncompress initrd, put driver into it and make update-initrd. Is that right? if...

but how can i boot the system when no grub is working? i tried with ubuntu livecd but was not able to chroot into the mounted boot partition from proxmox (system said: /bin/bash not found)- which is correct. on the other hand: why did the system install correctly? this means that the driver was...

how can i verify this? In all past versions i had no issues. And the system does hang by grub in grub-rescue. the update-initramfs -u has to be done within a booted system, or am i wrong?!

Hi After i upgraded my proxmox 2.3 cluster to 3.1, i was not able to mount an USB 3.0 harddisk anymore. So i googled around and found that someone could solve the issue with a complete new installation. So i downlaoded Proxmox VE 3.1 ISO. My Servers (4) all have a 3ware raidcontroller (sata)...