This is what I planned to do so far....
from Proxmox:
mount /dev/mapper/baculaVG-baculaRaid /mnt/bacula
mount --bind /mnt/bacula /var/lib/vz/private/101/mnt/bacula
(I created both /mnt/bacula in both Proxmox and in the vz area).
Am I going down the correct road?
I've been searching the forums for info on howto add an additional hard drive to a vz container. This vz will be running Bacula, a backup server for my workstations.
I've read you can't assign block devices to a vz container?, someone said to 'Bind mount', not sure how to do that?
I've set up...
dietmar,
Why, yes indeed... Why didn't I think to look in there?
I x'ed out and changed some private info below.
<snip..snip..
host smtp.somewhere.net[xxx.xx.xxx.xxx] refused to talk to me: somewhere.net 554 Your access to this mail system has been rejected due to the sending MTA's poor...
I current have the latest Proxmox installed and working perfectly with a few VZ/KVM containers. Whenever a backup is completed an email gets sent out to my gmail account, I receive it just fine, however when I try and send an email from a ssh terminal to the same address, nothing shows up in...
As a follow-up...
I did the above, with the following additional steps:
4: lvextend -L +<size of disk in GB> /dev/mapper/pve-data
5: umount /dev/mapper/pve-data
6: e2fsck -f /dev/mapper/pve-data
7: resize2fs /dev/mapper/pve-data
8: mount /dev/mapper/pve-data /var/lib/vz
back up and...
Hello,
I posted earlier about adding additional hard drives to a new Proxmox system and I am looking for a bit of clarification.
I have a new install of Proxmox, no vm have been created, A single 2TB hard was used during the install. I would like to add an additional 2-3 more 2TG drives to...
I have a friend who is wanting to play around with Proxmox. He is looking to install multiple versions of Windows OS, XP, Vista, Windows Home Server.
I have installed Proxmox for him on a single 2TB hd, and he has 2-3 additional 2TB hard drives he wants to use for his Windows Home Server, etc...
Just now found out the modules are available, there seems to be two different modules, atl1c.ko and atl1e.ko.
I added module atl1e.ko to /etc/modules, before I knew that atl1c.ko was already loaded, so both modules are installed but the NIC is not brough up during bootup. dmesg show the NIC but...
Hello,
I've recently installed Proxmox, running 2.6.32-2-pve kernel on a MSI 770-g45 motherboard which has a built-in Atheros AR8131M NIC.
I can't seem to find a module for this card with this kernel. I found a driver source code for this card but need to build it. Proxmox doesn't have the...
To update and close this thread...
Yes, it did work.!
After it was working again, I updated/dist-upgraded and restart the container a few times and it seems to still be working!
Many thanks.
I am in the process in playing around with Proxmox v1.5
I created a openVz container from a debian-6.0-standard_6.0-1 template.
Had it running, did a apt-get update and such, installed openssh and had everything working. I assigned a static IP address and was playing around with a dhcp/ddns...
Thanks for the quick reply.
I found out that, I was at fault, my firewall had been outgoing ftp connections! so sorry for the confusion.
By the way, awesome piece of software, Proxmox VE.
I am looking to download the source code for proxmoxVE and tried using ftp to connect to the download.proxmox.com/sources link and it doesn't find the sources.
the source code is open source, correct?
Thanks.
Jeff
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.