Recent content by hoppel118

Thank you. I already knew the two links. But unfortunately I didn't really get any further with them. I found the following post on reddit: https://www.reddit.com/r/Proxmox/comments/l9ksze/boot_and_run_a_vm_from_a_physical_disk_taken_from/ So my procedure maybe as follows: Setup Proxmox on a...

Hi, Debian OS (Stretch) is installed bare metal on the SSD of my server. There are also a lot of Docker Containers configured. My home automation software (FHEM) is installed to the bare metal Debian OS directly. Its not that easy to migrate this to a VM, because I have a lot of FHEM modules in...

Hello @MaddinB thanks for this hint. Now I did the following: mounted the iso file via supermicro ipmi web ui bootet the virtual cd rom pressed "e" while in proxmox boot menu configured grub as shown in the following screenshot pressed F10 (also tried STRG+X) to boot It still doesn't...

Hello fabian, thank you for the fast response. I am passing through the block device in this way because it was written by @mjb2000 in this thread some posts ago. I didn't read the official documentation. Sorry, my mistake.;) But yes, you are right. It is as easy as you wrote. The following...

Hello fabian, here is my container configuration file: arch: amd64 cores: 1 hostname: vdr memory: 4096 net0: name=eth0,bridge=vmbr0,gw=10.11.11.1,hwaddr=0A:D8:58:1F:AA:A3,ip=10.11.11.12/24,type=veth ostype: debian rootfs: local:110/vm-110-disk-1.raw,size=4G swap: 4096 lxc.aa_profile...

Hello guys, I have this exact same error when I shutdown an lxc while a cifs is mounted. @B4c4rd1 Can you explain your script a little bit more please? The path "/opt/enerspace/service/umountCifs.sh" doesn't exit for me, not at the host and not at the lxc. Wehre should your script be placed...

@mjb2000: Thanks for this hint. It seems to work as expected. ;) But one question. If I backup my lxc I see the following messages: INFO: starting new backup job: vzdump 110 --mode snapshot --compress lzo --node proxmox --storage local --remove 0 INFO: Starting Backup of VM 110 (lxc) INFO...

By the way, it's still not possible to use the current installation medium (PVE 4.4) with this mainboard. Which information do you need to debug that issue? It would be nice to use the installation medium in proxmox future versions. I would like to setup the proxmox host system to a zfs. This...

Hello, here is the other user from the vdr-portal. ;) That's it! The needed package is "ca-certificates". After installing that package "apt-get update" works as expected. Thank you very much! Viele Grüße Hoppel

OK, thanks for reporting back. Bye

interesting, I am confused... Which ipmi-/bios-firmware do you use? I use the following... Firmware Revision : 01.15 Firmware Build Time : 02/19/2016 BIOS Version : 1.0a BIOS Build Time : 03/22/2016 CPLD Version : 02.b1.01 Redfish Version : 1.0.1 Greetings Hoppel

Did you install via cd-rom, usb or ipmi? I didn't test the cd-rom and usb methods? Maybe my installer error is related to ipmi... Greetings Hoppel

FYI: the installer iso for proxmox pve 4.3 also doesn't work for me. But it's ok, I have the way to install the debian netinstall and the proxmox repo. Both isos work fine, if try to install them in a kvm on my already installed proxmox host.

Hello guys, at the moment I am virtualizing my openmediavault to a kvm. My hardware specs: Mainboard: Supermicro X11SSH-CTF CPU: Intel Xeon E3-1240Lv5 4x 2.10GHz So.1151 TRAY RAM: 64GB DDR4 ECC UDIMM Onboard-SAS-Controller: LSI SAS3008 PCI-Express (with 8x4TB WD Red in a Eaid-Z2) On the host...

Hi DzAirmaX, in the first phase of virtualising my server I am going the way with kvm only. In the second phase, when it's clear that everthing works as stable as without virtualising, I am going to try lxc. So you have to wait maybe some month until I can give you that feedback. I don't have...