Hi, i've set up a test configuration with IPCop as firewall on a HP Microserver N36L, the two NICs involved are two gigabit intel 82571EB:
http://www.intel.com/design/network/products/lan/controllers/82571eb.htm
This is network configuration:
ETH1 is WAN SIDE
ETH2 is LAN SIDE
ETH1 take a static IP(192.168.1.XXX) from my provider router(DHCP is possible too).
ETH2 has an IP choosed by me(192.168.2.100).
Bridge are used by IPCop.
The DHCP server is IPCop built in one... PCs on LAN side can get their own IP from IPCop without problems.
I've some performance issues during web surf, every page i click has a 75% probability to get HTTP timeout error, WAN side is a 100M optic fiber and surfing outside proxmox(such ad get an IP from provider router) works well as always. HTTP download is 90%-95% of max theorical(9MB/s instead of 10MB/s).
This could be a virtualisation related problem? Any tip?
Thanks!
http://www.intel.com/design/network/products/lan/controllers/82571eb.htm
This is network configuration:
ETH1 is WAN SIDE
ETH2 is LAN SIDE
ETH1 take a static IP(192.168.1.XXX) from my provider router(DHCP is possible too).
ETH2 has an IP choosed by me(192.168.2.100).
Bridge are used by IPCop.
The DHCP server is IPCop built in one... PCs on LAN side can get their own IP from IPCop without problems.
I've some performance issues during web surf, every page i click has a 75% probability to get HTTP timeout error, WAN side is a 100M optic fiber and surfing outside proxmox(such ad get an IP from provider router) works well as always. HTTP download is 90%-95% of max theorical(9MB/s instead of 10MB/s).
This could be a virtualisation related problem? Any tip?
Thanks!
Last edited: