apcupsd - Network Monitoring (CGI) Program [SOLVED]
Hello,
For a new APC Smart-UPS 2200, I have install apcupsd and apcupsd-cgi
The configuration for the APC Smart-UPS 2200 with usb is like the
dokumentation: http://www.apcupsd.com/manual/manual.html
Every local tests work properly*
But I can not see the webpage remote for monitoring the ups (like the proxmox managing page).
I dry "http://proxmox-local-ip/cgi-bin/multimon.cgi"
the answer is always "The requested URL /cgi-bin/multimon.cgi was not found on this server."
the same with: "http://proxmox-local-ip/multimon.cgi" , "http://proxmox-local-ip/cgi/multimon.cgi"
and the address changes immediately to "https://..."
can someone help me?
regards,
maxprox
*1
/usr/lib/cgi-bin/apcupsd/multimon.cgi
=> I see the html text
*2
apcaccess status
and apctest
=> works
Hello,
For a new APC Smart-UPS 2200, I have install apcupsd and apcupsd-cgi
The configuration for the APC Smart-UPS 2200 with usb is like the
dokumentation: http://www.apcupsd.com/manual/manual.html
Every local tests work properly*
But I can not see the webpage remote for monitoring the ups (like the proxmox managing page).
I dry "http://proxmox-local-ip/cgi-bin/multimon.cgi"
the answer is always "The requested URL /cgi-bin/multimon.cgi was not found on this server."
the same with: "http://proxmox-local-ip/multimon.cgi" , "http://proxmox-local-ip/cgi/multimon.cgi"
and the address changes immediately to "https://..."
can someone help me?
regards,
maxprox
*1
/usr/lib/cgi-bin/apcupsd/multimon.cgi
=> I see the html text
*2
apcaccess status
and apctest
=> works
Last edited: