Hi,
I got a pcie sas controller, (LSI 9211-8i SAS SA) plug in the first pcie
in another pcie i got a graphics card that i need to passthrough a VM.
so my problem is that both card works well but not together....
when i start the vm that got the graphics card the other card just disapear...
I really don't know what to do, even where to start investigation.
the only peace of information that i found is the console that show this :
the config file of the vm is :
hope you can help me
thank you
I got a pcie sas controller, (LSI 9211-8i SAS SA) plug in the first pcie
in another pcie i got a graphics card that i need to passthrough a VM.
so my problem is that both card works well but not together....
when i start the vm that got the graphics card the other card just disapear...
I really don't know what to do, even where to start investigation.
the only peace of information that i found is the console that show this :
Code:
[ 969.449634] VFIO - User Level meta-driver version: 0.3
[ 969.453604] vfio-pci 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
[ 969.470012] vfio_pci: add [10de:1b80[ffff:ffff]] class 0x000000/00000000
[ 969.470054] vfio_pci: add [10de:10f0[ffff:ffff]] class 0x000000/00000000
[ 969.594135] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 969.594186] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 969.618208] mpt2sas_cm0: removing handle(0x000b), sas_addr(0x4433221103000000)
[ 969.618235] mpt2sas_cm0: removing : enclosure logical id(0x500605b0013ca580), slot(0)
[ 969.634134] sd 0:0:1:0: [sdb] Synchronizing SCSI cache
[ 969.634187] sd 0:0:1:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 969.658225] mpt2sas_cm0: removing handle(0x0009), sas_addr(0x4433221100000000)
[ 969.658249] mpt2sas_cm0: removing : enclosure logical id(0x500605b0013ca580), slot(3)
[ 969.678169] sd 0:0:2:0: [sdc] Synchronizing SCSI cache
[ 969.678230] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 969.702191] mpt2sas_cm0: removing handle(0x000a), sas_addr(0x4433221102000000)
[ 969.702224] mpt2sas_cm0: removing : enclosure logical id(0x500605b0013ca580), slot(1)
[ 969.722125] sd 0:0:3:0: [sdd] Synchronizing SCSI cache
[ 969.722196] sd 0:0:3:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 969.766182] mpt2sas_cm0: removing handle(0x000c), sas_addr(0x4433221107000000)
[ 969.766209] mpt2sas_cm0: removing : enclosure logical id(0x500605b0013ca580), slot(4)
[ 969.766530] mpt2sas_cm0: sending message unit reset !!
[ 969.768083] mpt2sas_cm0: message unit reset: SUCCESS
[ 970.755992] device tap300i0 entered promiscuous mode
[ 970.761675] vmbr0: port 2(tap300i0) entered blocking state
[ 970.761697] vmbr0: port 2(tap300i0) entered disabled state
[ 970.761803] vmbr0: port 2(tap300i0) entered blocking state
[ 970.761822] vmbr0: port 2(tap300i0) entered forwarding state
[ 971.426022] vfio-pci 0000:02:00.0: enabling device (0000 -> 0003)
[ 971.426192] vfio_ecap_init: 0000:02:00.0 hiding ecap 0x19@0x900
[ 976.158048] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 976.466036] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 981.394030] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 981.606022] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 981.838027] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 982.038062] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 986.487207] kvm [3449]: vcpu3, guest rIP: 0xfffff807909e62b6 ignored rdmsr: 0x611
[ 986.487249] kvm [3449]: vcpu3, guest rIP: 0xfffff807909e62cc ignored rdmsr: 0x641
[ 986.487275] kvm [3449]: vcpu3, guest rIP: 0xfffff807909e62e2 ignored rdmsr: 0x606
[ 986.487300] kvm [3449]: vcpu3, guest rIP: 0xfffff807909e610e ignored rdmsr: 0x606
[ 986.487326] kvm [3449]: vcpu3, guest rIP: 0xfffff807909e119c ignored rdmsr: 0x641
[ 986.487351] kvm [3449]: vcpu3, guest rIP: 0xfffff807909e11e7 ignored rdmsr: 0x611
[ 986.802039] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 986.998060] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
[ 987.362040] usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
the config file of the vm is :
Code:
agent: 1
balloon: 2048
bios: ovmf
bootdisk: virtio0
cores: 4
cpu: IvyBridge,hidden=1
efidisk0: data:vm-300-disk-1,size=4M
hostpci0: 02:00,pcie=1,x-vga=on
ide0: none,media=cdrom
machine: q35
memory: 8192
name: win-emma-gtx
net0: virtio=CE:E3:3A:68:AB:5F,bridge=vmbr0
numa: 0
ostype: win10
scsihw: virtio-scsi-pci
smbios1: uuid=60c6b50e-a94e-46b4-a7d5-740e03ffb35d
sockets: 1
usb0: host=1-1.2
vga: qxl
virtio0: ssd:vm-300-disk-1,cache=writeback,size=250G
virtio1: data:vm-300-disk-2,cache=writeback,size=500G
hope you can help me
thank you