Latest activity
-
JCopy the .conf file from /etc/PvE/nodes/node1/lxc/xxx.conf to /etc/PvE/nodes/node2/lxc/xxx.conf (u don't have access to my host actually, so the path could be a little bit different). xxx is the number of the effected lxc. The lxc should be...
-
JWhich CPU type is configured for the VM? host has issues, when the server use different CPUs. Which CPUs do you have in the 3 nodes (AMD / Intel and generation is important)
-
JJohannes S reacted to Falk R.'s post in the thread Empfehlung für System-SSD für Proxmox + SSDs für VMs / LXC-Container with
Like.
Natürlich kannst du die Disks einfach tauschen, aber bei den Systemdisks etwas aufpassen, da du auch Bootpartitionen drauf hast. Dafür gibts schöne Anleitungen wie z.B. diese... -
Falk R. replied to the thread Empfehlung für System-SSD für Proxmox + SSDs für VMs / LXC-Container.Natürlich kannst du die Disks einfach tauschen, aber bei den Systemdisks etwas aufpassen, da du auch Bootpartitionen drauf hast. Dafür gibts schöne Anleitungen wie z.B. diese... -
JJohannes S reacted to Falk R.'s post in the thread Skript nach Beendigung eines Sicherungsvorganges ausführen with Like.
Deshalb mache ich mit dem PBS VM Backups aller VMs, aber z.B. SQL und Exchange sichere ich zusätzlich per Veeam Agent. Damit kann man dann zu den VM Restores über den PBS auch Application Restores ausgewählter Datenbanken machen. Die kleine 5...
-
JThank you so much, this explanation cleared things up a lot for me. In the end, I decided to have a third node and install Ceph. I'll do it in the next few days; I think it's the best option.
-
JYes, Ceph is great! Just be aware that there may be pitfalls you should know before starting that journey: https://forum.proxmox.com/threads/fabu-can-i-use-ceph-in-a-_very_-small-cluster.159671/
-
JThank you so much for this information; this content you've provided will be incredibly useful. Thank you very much.
-
JJohannes S reacted to fweber's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
Yes, I saw that (and thanks to @benyamin for preparing a PR!). But I think once a PR is ready, being able to contribute additional testing (with regards to the bug as well as to performance) can't hurt and might help to get the PR merged faster...
-
JJohannes S reacted to RoCE-geek's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
And @fweber, of course I understand the omnipresent DEV buzz, so all is OK, just please, there should be some regular "bumps" in the rising threads from the Proxmox staff. We, as a community, are quite mighty and capable, but definitely not...
-
Mmaze-m posted the thread Empfehlung für System-SSD für Proxmox + SSDs für VMs / LXC-Container in Proxmox VE (Deutsch/German).Hallo zusammen! Ich habe einen alten Fujitsu Primergy RX300 S8 laufen und an einem in den IT-Mode geflashten HBA sämtliche Platten angeschlossen (siehe Bild). Zur Zeit habe ich mein Proxmox-Installation gemirrored auf den beiden rechten Platten...
-
-
JJohannes S reacted to RoCE-geek's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
Hi @fweber, thanks for the response, but to be clear, nothing is needed to cooperate on the vioscsi bug. I've proposed 3 patches, @benyamin will add his own, so we HAVE a solution, and we're just benchmarking them. The final resolution and...
-
JJohannes S reacted to fweber's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
Hi! For now, I'm focusing on the VirtIO SCSI (and, apparently also Block) problems with 0.1.285 reported here. @RoCE-geek, thank you for your in-depth investigation of this bug, reporting this issue upstream, and providing a simple fio...
-
JIch wollte mal nicht so direkt sein und schön, dass Du nun den korrekten Weg beschreibst.
-
JHallo @news, das ist der entscheidende Punkt. Die ST4000LM024 nutzt SMR (Shingled Magnetic Recording). @jan-t: Solltest du ZFS (oder RAID) unter Proxmox nutzen wollen, ist diese Platte absolut ungeeignet. SMR führt bei ZFS-Schreibvorgängen...
-
JA node running HA-relevant resources fences itself, if Quorum ist lost. The reboot is "hard", triggered locally. Not by an ssh-command from another node ;-)
-
Ffribse replied to the thread Trying to set up PBS to use S3 on QUObjects App (QNAP).Hi @Chris Ok, so it takes backup of all my ct's and one of my vm (I have two), the one that it fails on is the biggest, and it stops at 22%. PBS becomes unresponsive on the GUI, but I can still access via the PVE console. Should I make a new...
-
Uuzumo replied to the thread Dell PowerEdge direct NVME v.s. PERC H9xx Hardware RAID.Based on our experience testing the HBA9500 with Kioxia NVMe SSDs, the Tri-Mode controller does not offer any speed improvement over SAS when using NVMe; in fact, it is slower. Therefore, there is no point in purchasing NVMe storage...
-
D*Daedalus posted the thread PVE and namespaces with PBS in Proxmox Backup: Installation and configuration.I'm not sure if I'm just an idiot, or if what I'm trying to do just isn't possible for some reason, but here goes: PVE cluster, connected to PBS, both latest versions as of today. For the sake of not cluttering up the GUI, I have a single PBS...
-
Tthearona replied to the thread Error When Live Migrating VM.Which CPU type is configured for the VM? host has issues, when the server use different CPUs. Which CPUs do you have in the 3 nodes (AMD / Intel and generation is important)
