Latest activity
-
Ggctwnl replied to the thread [SOLVED] Intel NIC e1000e hardware unit hang.Nice but can we be certain there is no hidden backdoor (even without using the cloud option)? Is the software open source and can it be checked by a community and compiled yourself? If I would use this, I would lock it down extremely tight. No...
-
Jjbsk posted the thread [SOLVED] Terraform/OpenTofu roadmap in Proxmox VE: Installation and configuration.Hello, I would like to know if you plan (someday, possible roadmap, Christmas gift) to create Terraform modules for PVE. Thank you, Best regards, Jbsky
-
readyspace replied to the thread Ceph Pool PGs Reduced to 32 by Autoscale Despite Setting 256 – Is This Normal?.Yes—this is expected with the PG autoscaler. With a mostly empty pool, Ceph starts low (often 32 PGs) and grows PGs as data increases unless you guide it with bulk, target_size_ratio/bytes, or a pg_num_min. -
AArvyr replied to the thread Almalinux 10 ct DNS not functioning.I just encountered the very same problem, setting the DNS via pct command doesn't really work. If I only set up a single dns ip then it works. However, if I enter multiple ip addresses, none of them get propagated into the container. To me it...
-
CChirath Perera reacted to readyspace's post in the thread Failed to prepare disks for restore with
Like.
Are you using PVE 9? If so, Veeam’s restore paths do not yet fully support Proxmox 9 -
CChirath Perera reacted to readyspace's post in the thread Failed to prepare disks for restore with Like.
Hi @Chirath Perera , you might want to report this to Veeam. See what they say.
-
readyspace replied to the thread Failed to prepare disks for restore.Hi @Chirath Perera , you might want to report this to Veeam. See what they say.
-
/etc/pve is mounted by pve-cluster service. The real data is in /var/lib/pve-cluster/config.db which is an sqlite database. (Quoting https://forum.proxmox.com/threads/this-is-bad-etc-pve-is-missing-on-boot.127059/post-555167 ). "If you have... -
CChirath Perera replied to the thread Failed to prepare disks for restore.Yes, PVE 9.0.10. But Restoration is successful when using a host-level backup.
-
Yyunmkfed replied to the thread Proxmox hangs after upgrade to v9.I just took another photo of the console. While it is still responsive my console is generating warnings.
-
-
readyspace replied to the thread Failed to prepare disks for restore.Are you using PVE 9? If so, Veeam’s restore paths do not yet fully support Proxmox 9
-
Ddevaux posted the thread Ceph Pool PGs Reduced to 32 by Autoscale Despite Setting 256 – Is This Normal? in Proxmox VE: Installation and configuration.Hi everyone, I’m configuring a new Ceph cluster managed by Proxmox VE 9.0 (ceph version 19.2.3) with the following setup: - Nodes: 3 hosts, each with 5x ThinkSystem 3.5" U.3 7500 PRO 1.92TB NVMe drives (15 OSDs total, ~28.8 TB raw capacity). -...
-
Jjaminmc replied to the thread Minor apparmor problem with tor.Proxmox utilizes Ubuntu’s kernels with patches for virtual machines and LXC optimizations. Consequently, AppArmor closely resembles Ubuntu rather than Debian. Therefore, the patches Ubuntu incorporated into AppArmor are the root cause of the...
-
cheiss replied to the thread [SOLVED] Multti-site cluster without corosync.Hi, the proper solution here is to make separate clusters. For a unified management plane, we recently introduced the Proxmox Datacenter Manager: https://forum.proxmox.com/threads/proxmox-datacenter-manager-0-9-beta-released.171742/ While it is... -
CChirath Perera posted the thread Failed to prepare disks for restore in Proxmox VE: Installation and configuration.Hi, I am attempting to restore a virtual machine (VM) from a Veeam Agent-based backup. The VM was located on a Proxmox host when the backup was created, and I am trying to restore it to a different Proxmox host. However, I am encountering the...
-
Ttenstareri posted the thread [SOLVED] Multti-site cluster without corosync in Proxmox VE: Installation and configuration.Is it possible to run a multi-site cluster without corosync? We like the functionality of having a cluster to * easily manage them, see their summaries and connect to the virtual desktop * add new nodes and cloning existing VMs but we have...
-
Ttenstareri replied to the thread [SOLVED] Can a VM backup be used on a different node?.Hey Hannes, awesome, thank you!
-
dcsapak replied to the thread Enhancement: Set custom url per host for console/webgui access.hi, this should already be possible. After adding a remote, simply edit the remote in the gui and enter the url in the 'web ui url' field -
Jjaminmc replied to the thread Is there a way to install a 6.16 or 6.17 kernel on proxmox?.The latest Ubuntu kernel 6.17.1-6.6, patched with the Proxmox Magic, is available at the following link: https://github.com/jaminmc/pve-kernel/releases/tag/6.17.1-6.6. This kernel includes patches that address AppArmor bugs identified by the...
-
FFrankList80 replied to the thread Full Server backup + restore solution.i concur to @BobhWasatch approach. Have a cold standby with similiar hardware specs, potentially with the same shared storage. "Fast Backups, Fast Restores". No harm meant to the "cattle", but this is for me the "Cattle vs. Pets" thingy...
