Latest activity
-
Bbbx1_ posted the thread PVE Full Mesh reconfiguration - Ceph (got timeout 500) in Proxmox VE: Installation and configuration.Hello everyone, I have a 3-node PVE cluster that I am using for testing and learning on. On this PVE cluster, I recently created a CEPH pool and had 4 VMs residing on it. My PVE cluster was connected to my Mellanox 40GbE switch but I wanted to...
-
-
Moayad replied to the thread Error block 0.Hi, May you please provide us more details? - The PVE installed successfully? - What storage you are using for the root LVM, ZFS, or BTRFS? - Have you checked the dmesg? -
Moayad replied to the thread Almalinux 10 ct DNS not functioning.Hi, I would compare the following, if the AlmaLinux 10 CT have the same config where the other CT works: cat /etc/resolv.conf ping -c3 google.com ping -c3 8.8.8.8 As well as the CT config `pct config <CTID>` this will help if the issue is...
-
GGMBauer reacted to Johannes S's post in the thread Empfehlung NAS ? altes synology oder OMV? with
Like.
Dem würde ich nicht so pauschal folgen: Erstens tun sich gerade Neulinge mit den bind-mounts für NFS schwer. Zweitens sieht die Dokumentation beider Projekte eine Installation als docker- oder podman-Container mit docker-compose/podman-compose... -
trickyearlobe replied to the thread Cannot access Virtual Machine BIOS.In my case, I needed to disable secure boot to load my custom "unsigned" Linux kernel. Hitting ESC after a VM reset worked fine, thanks forum members for the info. I would have guessed eventually after trying all the F2, F8, F10, F12, DEL... -
BBlueMatt replied to the thread Slow memory leak in 6.8.12-13-pve.As I posted last Thursday, I tested that as well with no change. That kernel does *not* contain the "ice: fix Rx page leak on multi-buffer frames" fix (which is the -ice-fix builds), though of course those also don't fix the issue.
-
Ccrally replied to the thread Server Upgrade - Unterstützung/Beratung bei Auswahl der Hardware.So die 5060Ti ist angekommen und die Sammelschienen kommen heute auch. Habe mich übrigens für diese entschieden: https://www.phoenixcontact.com/de-de/produkte/verteilerklemme-ptfix-12x25-vt-3273302 Zwischenzeitlich hab ich auch nochmal...
-
-
Aalexandere posted the thread Almalinux 10 ct DNS not functioning in Proxmox VE: Installation and configuration.I've installed a Almalinux 10 container with the standard provided template, but DNS doesn't seem to be functioning. A different OS with the same config works without issue.
-
FFranky779 posted the thread Restore VM from Veeam/VSphere to PMX VE V9 not possible - HotAdd fails in Proxmox VE: Installation and configuration.Hi, we are using Proxmox VE Cluster Version 9.0.10 (Enterprise) and we are not able to transfer machines which are actually in vSphere from Veeam Backups. In V8 it was possible. This is probably a Version 9 issue...
-
-
Stoiko Ivanov replied to the thread Quarantine Mail only in Plaintext.I assume you mean the daily spamreport sent to users who have mails in their quarantine? This is a change with PMG 9.0 - see https://pmg.proxmox.com/wiki/index.php/Roadmap#Proxmox_Mail_Gateway_9.0 The spamreport (and the admin report) now should... -
iprigger posted the thread Quarantine Mail only in Plaintext in Mail Gateway: Installation and configuration.Hi All, Maybe it's a stupid question... but on the former versions (7, 8) of PMG the quarantine messages were "nicely" (i.e. manager friendly) formatted messages. With the new version 9, this seems to have been changed. Or is it just me being... -
DHi everyone! I just reinstalled Proxmox on an HP Microserver Gen10 Plus, but I keep getting this error. I tried to disable it with some information I found online, but I couldn't. Does anyone know what this means and perhaps have a trick to...
-
-
Ssgw replied to the thread Datacenter und/oder Cluster mit local storage only.Soeben auf einem weiteren Node reproduziert: beim Upgrade von 8 auf 9 (bzw. Debian12 -> 13) werden o2cb und ocfs2 disabled.
-
UdoB reacted to IV-Kitti's post in the thread [SOLVED] PVE 9: Subscription validation timeout - Error 596 Connection timed out (both CLI and Web UI) with Like.
The issue was that the system was trying to connect to Proxmox servers via IPv6 first, but IPv6 connectivity wasn't working properly, causing timeouts. Diagnosis: - DNS resolution worked fine (both IPv4 and IPv6 addresses returned) - Basic... -
Stoiko Ivanov replied to the thread PMG AI integration.If you want to integrate something like that - you can check-out and use the custom-check-script integration: https://pmg.proxmox.com/pmg-docs/pmg-admin-guide.html#pmgconfig_custom_check let us know how it works out for you!
-
peterge-misoft replied to the thread NVMe Error - Delayed block allocation failed for inode ....Hmm I updated the firmware using this article: https://www.dannynieuwenhuis.nl/updating-samsung-980-990-pro-nvme-using-linux-cli/ Lets see if it comes up again. The next thing i would try is to disable the power saving features, I found this... -
Mmartinkubat replied to the thread Slow memory leak in 6.8.12-13-pve.Might be worth testing the regular 6.14.11-3-pve (2025-09-22T10:13Z) kernel instead of the -ice-fix builds, since it already carries relevant net/mm changes. I’ve since moved from Intel E810 to Mellanox, so can’t verify current ice behavior myself.
-
DDaanSelen replied to the thread [SOLVED] Will proxmox ever have a feature compared to ProxLB.Thank you!
-
Pphabaer replied to the thread Timeouts when calling a node's qemu endpoint.Great, thanks for the hint. Will try the test version and report back! :)
-
DDimDim50 reacted to Dunuin's post in the thread [SOLVED] Converting unprivileged LXC with custom user remapping to privileged LXC with Like.
So, what I did: 1.) backup the unprivileged LXC with VMID 126 to PBS 2.) restore it from PBS as unprivileged LXC with VMID 10000 3.) removed the bind-mount from the LXC 4.) mount it with: root@Enterprise:~# pct mount 10000 mounted CT 10000 in...
