Upgrade doesn't work

P

pugnacity

New Member
Aug 2, 2012
8
0
1
the update from proxmox-ve-2.6.32 doesn't work

Code: 
aptitude -f installThe following partially installed packages will be configured:
  proxmox-ve-2.6.32 pve-manager 
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
Setting up pve-manager (2.1-13) ...
Restarting PVE Daemon: pvedaemon.
Restarting PVE Status Daemon: pvestatd.
dpkg: error processing pve-manager (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-manager; however:
  Package pve-manager is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      configured to not write apport reports
                                                                            Errors were encountered while processing:
 pve-manager
 proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-manager (2.1-13) ...
Restarting PVE Daemon: pvedaemon.
Restarting PVE Status Daemon: pvestatd.
dpkg: error processing pve-manager (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-manager; however:
  Package pve-manager is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-manager
 proxmox-ve-2.6.32

the log says nothing
Code: 
Aug  2 07:54:59 SERVERNAME pvedaemon[28903]: received terminate requestAug  2 07:54:59 SERVERNAME pvedaemon[28903]: worker 28909 finished
Aug  2 07:54:59 SERVERNAME pvedaemon[28903]: worker 28907 finished
Aug  2 07:54:59 SERVERNAME pvedaemon[28903]: worker 28905 finished
Aug  2 07:54:59 SERVERNAME pvedaemon[28903]: server closing
Aug  2 07:55:01 SERVERNAME pvedaemon[37582]: starting server
Aug  2 07:55:01 SERVERNAME pvedaemon[37582]: starting 3 worker(s)
Aug  2 07:55:01 SERVERNAME pvedaemon[37582]: worker 37586 started
Aug  2 07:55:01 SERVERNAME pvedaemon[37582]: worker 37591 started
Aug  2 07:55:01 SERVERNAME pvedaemon[37582]: worker 37592 started
Aug  2 07:55:01 SERVERNAME pvestatd[28932]: server closing
Aug  2 07:55:02 SERVERNAME pvestatd[37697]: starting server
Aug  2 07:55:02 SERVERNAME pvedaemon[37582]: received terminate request
Aug  2 07:55:02 SERVERNAME pvedaemon[37582]: worker 37591 finished
Aug  2 07:55:02 SERVERNAME pvedaemon[37582]: worker 37586 finished
Aug  2 07:55:02 SERVERNAME pvedaemon[37582]: worker 37592 finished
Aug  2 07:55:02 SERVERNAME pvedaemon[37582]: server closing
Aug  2 07:55:05 SERVERNAME pvedaemon[37865]: starting server
Aug  2 07:55:05 SERVERNAME pvedaemon[37865]: starting 3 worker(s)
Aug  2 07:55:05 SERVERNAME pvedaemon[37865]: worker 37867 started
Aug  2 07:55:05 SERVERNAME pvedaemon[37865]: worker 37869 started
Aug  2 07:55:05 SERVERNAME pvedaemon[37865]: worker 37871 started
Aug  2 07:55:05 SERVERNAME pvestatd[37697]: server closing
Aug  2 07:55:05 SERVERNAME pvestatd[37894]: starting server

Code: 
pveversion -vpve-manager: not correctly installed (pve-manager/2.1/bdd3663d)
running kernel: 2.6.32-13-pve
pve-kernel-2.6.32-10-pve: 2.6.32-63
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-13-pve: 2.6.32-72
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.92-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.8-1
pve-cluster: 1.0-27
qemu-server: 2.0-47
pve-firmware: 1.0-17
libpve-common-perl: 1.0-28
libpve-access-control: 1.0-24
libpve-storage-perl: 2.0-29
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3

how can i fix this?
 
dietmar said:
What is the output of:

# dpkg --configure pve-manager
Click to expand...

Code: 
dpkg --configure pve-manager
Setting up pve-manager (2.1-13) ...
Restarting PVE Daemon: pvedaemon.
Restarting PVE Status Daemon: pvestatd.
dpkg: error processing pve-manager (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 pve-manager
 
dietmar said:
And what do you get with

# /etc/init.d/pvestatd start
Click to expand...
Code: 
 /etc/init.d/pvestatd start
Starting PVE Status Daemon: pvestatdERROR: can't aquire lock '/var/run/pvestatd.pid.lock' - Resource temporarily unavailable
 (warning).
 
dietmar said:
Does the following work?

# /etc/init.d/pvestatd stop
# dpkg --configure pve-manager
Click to expand...
the update process still doesn't work. i've already rebooted
Code: 
/etc/init.d/pvestatd stop
Stopping PVE Status Daemon: pvestatd.
root@proxmox:~# dpkg --configure pve-manager
Setting up pve-manager (2.1-13) ...
Restarting PVE Daemon: pvedaemon.
Restarting PVE Status Daemon: pvestatd.
dpkg: error processing pve-manager (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 pve-manager
 
Sigh, I can't see whats wrong. What do you get with:

# /etc/init.d/pvestatd restart; echo $?

and

# /etc/init.d/apache2 restart; echo $?
 
dietmar said:
Sigh, I can't see whats wrong. What do you get with:

# /etc/init.d/pvestatd restart; echo $?

and

# /etc/init.d/apache2 restart; echo $?
Click to expand...
Code: 
 root@proxmox:~# /etc/init.d/pvestatd restart; echo $?Restarting PVE Status Daemon: pvestatd.
0
root@proxmox:~#  /etc/init.d/apache2 restart; echo $?
Restarting web server: apache2 ... waiting .
0
i've got the same problem on an other node.
 
Does some of the following command returns errors:

# a2enmod perl
# a2enmod ssl
# a2enmod rewrite
# a2enmod proxy
# a2ensite pve.conf
 
dietmar said:
What if you do:

/var/lib/dpkg/info/pve-manager.postinst configure; echo $?
Click to expand...

Code: 
root@proxmox10:~# /var/lib/dpkg/info/pve-manager.postinst configure; echo $?
Restarting PVE Daemon: pvedaemon.
Restarting PVE Status Daemon: pvestatd.
1
 
after reinstalling the server and only installing proxmox-ve-2.6.32 the error occurs too

we're using debian squeeze backports has this influence on the behavior of proxmox?
 
pugnacity said:
after reinstalling the server and only installing proxmox-ve-2.6.32 the error occurs too

we're using debian squeeze backports has this influence on the behavior of proxmox?
Click to expand...

I assume this depends what packages you use from backports.? we do not test this here but I assume no.
 
could ceph-common be the problem?
Code: 
# dpkg -l| grep bpo
ii  ceph-common                         0.48argonaut-1~bpo60+1       common utilities to mount and interact with a ceph storage cluster
ii  libpopt0                            1.16-1                       lib for parsing cmdline parameters
ii  librados2                           0.48argonaut-1~bpo60+1       RADOS distributed object store client library
ii  librbd1                             0.48argonaut-1~bpo60+1       RADOS block device client library
 
I installed ceph-common on running 2.1 test machines (from ceph.com), at least there are no problems.
 
You must log in or register to reply here.
Top Bottom