Good Day,
I am not able to add an iSCSI disk to VMs (see attached image no-disk-showing-up.PNG).
Not sure what to look for, "pvesm status" takes quite some time to show output, the warning at the start is for a machine that seems to be running perfectly fine but not sure if it is causing issues otherwise. The only other oddity I can think of is the disk now has more than one letter rather than one (sdab).
iSCSI session:
fdisk of disk device:
Any help would be appreciated
- David
I am not able to add an iSCSI disk to VMs (see attached image no-disk-showing-up.PNG).
Not sure what to look for, "pvesm status" takes quite some time to show output, the warning at the start is for a machine that seems to be running perfectly fine but not sure if it is causing issues otherwise. The only other oddity I can think of is the disk now has more than one letter rather than one (sdab).
Code:
root@pve002:~# time pvesm status
WARNING: PV gZmwSx-6q0U-ZnY0-xmPo-vfzg-qiox-L8L4H7 on /dev/sdn5 was already found on /dev/sdz5.
WARNING: PV gZmwSx-6q0U-ZnY0-xmPo-vfzg-qiox-L8L4H7 prefers device /dev/sdz5 because device was seen first.
Name Type Status Total Used Available %
LVM_server24 lvm active 267382784 262144000 5238784 98.04%
Mail01 iscsi active 0 0 0 0.00%
NAS_ISO nfs active 1056522240 51728000 1004794240 4.90%
NEW_BAKUPS nfs active 262144000 194268032 67875968 74.11%
NordijaPortalCSR iscsi active 0 0 0 0.00%
OpenVPN_New iscsi active 0 0 0 0.00%
OrionOTT iscsi active 0 0 0 0.00%
PVE002 nfs active 419430400 174031616 245398784 41.49%
Radius002 iscsi active 0 0 0 0.00%
Radius01 iscsi active 0 0 0 0.00%
Syslog01 iscsi active 0 0 0 0.00%
UbiqutiNMS iscsi active 0 0 0 0.00%
dhcp-server-ipv6 iscsi active 0 0 0 0.00%
epon iscsi active 0 0 0 0.00%
gog iscsi active 0 0 0 0.00%
jitbit iscsi active 0 0 0 0.00%
local dir active 83622144 38098944 45523200 45.56%
local-zfs zfspool active 73623720 28100540 45523180 38.17%
netflow-server iscsi active 0 0 0 0.00%
ns1 iscsi active 0 0 0 0.00%
privatewww iscsi active 0 0 0 0.00%
provisioning-system iscsi active 0 0 0 0.00%
proxmoxDB iscsi active 0 0 0 0.00%
publicwww iscsi active 0 0 0 0.00%
recursor1 iscsi active 0 0 0 0.00%
syslog001 iscsi active 0 0 0 0.00%
testBP iscsi active 0 0 0 0.00%
testnordija iscsi active 0 0 0 0.00%
verimatrix42 iscsi active 0 0 0 0.00%
real 2m11.064s
user 2m10.199s
sys 0m0.587s
Code:
root@pve002:~# pveversion -v
proxmox-ve: 5.3-1 (running kernel: 4.15.18-10-pve)
pve-manager: 5.3-8 (running version: 5.3-8/2929af8e)
pve-kernel-4.15: 5.3-1
pve-kernel-4.15.18-10-pve: 4.15.18-32
corosync: 2.4.4-pve1
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.1-3
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-44
libpve-guest-common-perl: 2.0-19
libpve-http-server-perl: 2.0-11
libpve-storage-perl: 5.0-36
libqb0: 1.0.3-1~bpo9
lvm2: 2.02.168-pve6
lxc-pve: 3.1.0-2
lxcfs: 3.0.2-2
novnc-pve: 1.0.0-2
proxmox-widget-toolkit: 1.0-22
pve-cluster: 5.0-33
pve-container: 2.0-33
pve-docs: 5.3-1
pve-edk2-firmware: 1.20181023-1
pve-firewall: 3.0-17
pve-firmware: 2.0-6
pve-ha-manager: 2.0-6
pve-i18n: 1.0-9
pve-libspice-server1: 0.14.1-1
pve-qemu-kvm: 2.12.1-1
pve-xtermjs: 3.10.1-1
qemu-server: 5.0-45
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.12-pve1~bpo1iSCSI session:
Code:
Target: iqn.2005-10.org.freenas.ctl:provisioning-system (non-flash)
Current Portal: 172.16.32.12:3260,1
Persistent Portal: 172.16.32.12:3260,1
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1993-08.org.debian:01:4b27453811a8
Iface IPaddress: 172.16.32.52
Iface HWaddress: <empty>
Iface Netdev: <empty>
SID: 27
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE
*********
Timeouts:
*********
Recovery Timeout: 120
Target Reset Timeout: 30
LUN Reset Timeout: 30
Abort Timeout: 15
*****
CHAP:
*****
username: <empty>
password: ********
username_in: <empty>
password_in: ********
************************
Negotiated iSCSI params:
************************
HeaderDigest: None
DataDigest: None
MaxRecvDataSegmentLength: 262144
MaxXmitDataSegmentLength: 131072
FirstBurstLength: 131072
MaxBurstLength: 16776192
ImmediateData: Yes
InitialR2T: Yes
MaxOutstandingR2T: 1
************************
Attached SCSI devices:
************************
Host Number: 32 State: running
scsi32 Channel 00 Id 0 Lun: 0
Attached scsi disk sdab State: runningfdisk of disk device:
Code:
root@pve002:~# fdisk /dev/sdab
Welcome to fdisk (util-linux 2.29.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0xc32c0476.
Command (m for help): p
Disk /dev/sdab: 80 GiB, 85899345920 bytes, 167772160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 16384 bytes
I/O size (minimum/optimal): 16384 bytes / 1048576 bytes
Disklabel type: dos
Disk identifier: 0xc32c0476Any help would be appreciated
- David
