Support 2 WAN IP's to single interface Eth0

joeleo

Member
Apr 24, 2009
41
0
6
Hi, I have hosted dedicated server with 2 NICs Eth0 & Eth1. (Eth0 is my public facing interface WAN & Eth1 is for private IP's which will support all internal VM's).

I'd like to see some examples on how to configure the WAN interfaces and how the internal VM's route to either of the WAN subnets. I'd prefer a setup where I control the VM network configurations (but would welcome seeing all options).

Note: I've read through this wiki:
https://pve.proxmox.com/wiki/Vlan
https://pve.proxmox.com/wiki/Vlans (I see this article use the bonding but have not been able to get this to work... Also, want to understand when to use one vs the other, especially, with my need to support the 2 WAN subnets).

Appreciate any sample configs posted here - Thanks!

--Joe
 

joeleo

Member
Apr 24, 2009
41
0
6
Per last post, anyone can help with config example to support multi WAN subnet to same physical NIC? My ISP has provided me with 2 WAN subnets that connects to same physical NICs. I wish to have backend VM's on private IP to use a particular outbound WAN subnet. Thanks in advance for you help!
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!