Remote web GUI

[polandlp]

Hello, I have a proxmox server and I would like to access the GI web from a different network because the server is in a different building than I am. I don't even know how to get to know public ip server.
P.S.
It's the first time I'm using Proxmox and sorry my English is not perfect

 

[fabian]

please post in english anyway - even if not perfect we'll try to understand

 

[polandlp]

My server is on a different network than I and I would like to be able to remotely access the web GUI

 

[fabian]

well, if the remote network is reachable and no firewall inbetween blocks access this should work out of the box. note that the pve-firewall if enabled will block access from outside the local network - see https://pve.proxmox.com/pve-docs/pve-admin-guide.html#pve_firewall_ip_sets for how to configure it to allow access from other networks/hosts.

 

[polandlp]

ok and how i can see a public IP?

 

[fabian]

ip -c a will show you all currently configured network devices and their addresses.

 

[polandlp]

I have one more problem, I cannot see the public address or do I have to configure something to see it and if so, what color

 

[fabian]

if you don't see a public address on the PVE server, then it is likely behind a router doing NAT and you need to setup port forwarding..

 

[polandlp]

what ports are we interested in? I have redirection 8006, 443 and 80, these are enough?

 

[fabian]

https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_ports_used_by_proxmox_ve

 

[polandlp]

Thank you all the problems have been resolved

 

[polandlp]

Hello i have 1 problem I still can't see public IP on proxmox and all ports are redirected

 

[L1243]

Is there already a connection between these Buildings?
If yes do it over that private connection, publishing a WebGUI to the Internet is never a good idea

 

[polandlp]

ok i'll think about it