Hello
We use this in cluster.conf:
However when fencing tries to shutdown a node the rackpdu outlets are power cycled one at a time, instead of turning all of them off then powering all on.
Is that a possible bug or does the fence configuration above need to be changed?
We use this in cluster.conf:
Code:
<fencedevices>
<fencedevice agent="fence_apc" ipaddr="10.200.100.11" login="admin" name="apc11" passwd="xxxxxxx"/>
<fencedevice agent="fence_apc" ipaddr="10.200.100.78" login="admin" name="apc78" passwd="ssssi"/>
<fencedevice agent="fence_apc" ipaddr="10.200.100.88" login="admin" name="apc88" passwd="zzzzzz"/>
</fencedevices>
<clusternodes>
<clusternode name="fnode241" nodeid="1" votes="1">
<fence>
<method name="power">
<device name="apc11" port="4" secure="on"/>
<device name="apc11" port="5" secure="on"/>
<device name="apc78" port="4" secure="on"/>
</method>
</fence>
</clusternode>
<clusternode name="node243" nodeid="2" votes="1">
<fence>
<method name="power">
<device name="apc11" port="2" secure="on"/>
<device name="apc78" port="2" secure="on"/>
<device name="apc78" port="3" secure="on"/>
</method>
</fence>
</clusternode>
</clusternodes>
However when fencing tries to shutdown a node the rackpdu outlets are power cycled one at a time, instead of turning all of them off then powering all on.
Is that a possible bug or does the fence configuration above need to be changed?