PVE 4.2 Public IPv4 for CT/VM not working

Discussion in 'Proxmox VE: Networking and Firewall' started by AndyPL, May 6, 2016.

  1. AndyPL

    AndyPL New Member

    Joined:
    May 6, 2016
    Messages:
    1
    Likes Received:
    0
    Hi,

    Sorry for my poor english ;)

    I have a problem to assign public IP for CT/VM

    PVE network configuration:

    auto vmbr0
    iface vmbr0 inet static
    address 91.XXX.XXX.151
    netmask 255.255.255.240
    gateway 91.XXX.XXX.145
    bridge_ports eth0
    bridge_stp off
    bridge_fd 0

    CT network configuration

    auto eth0
    iface eth0 inet static
    address 91.XXX.XXX.150
    netmask 255.255.255.240
    gateway 91.XXX.XXX.145

    ID: net0
    Name: eth0
    Bridge: vmbr0
    Firewall: no

    Regards
     
    #1 AndyPL, May 6, 2016
    Last edited: May 6, 2016
  2. jhort

    jhort New Member

    Joined:
    May 5, 2016
    Messages:
    2
    Likes Received:
    0
    well, I am far from being a network pro^^
    if there are no restrictions from your isp (like one ip = 1 hwaddress), I would try:


    auto vmbr0
    iface vmbr0 inet static
    address 91.XXX.XXX.151
    netmask 255.255.255.240
    gateway 91.XXX.XXX.145
    bridge_ports eth0
    bridge_stp off
    bridge_fd 0

    auto vmbr1
    iface vmbr1 inet static
    address 91.XXX.XXX.150
    netmask 255.255.255.240
    bridge_ports eth0
    bridge_stp off
    bridge_fd 0

    CT
    ID: net0
    Name: eth0
    Bridge: vmbr1
    Firewall: no
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice