Hi,
I would like to upgrade my system and I've got this issue bellow:
#apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
5 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]?
Setting up pve-cluster (1.0-33) ...
Restarting pve cluster filesystem: pve-clusterstart-stop-daemon: warning: failed to kill 2110: No such process
fuse: failed to access mountpoint /etc/pve: Transport endpoint is not connected
[main] crit: fuse_mount error: Transport endpoint is not connected
[main] notice: exit proxmox configuration filesystem (-1)
(warning).
invoke-rc.d: initscript pve-cluster, action "restart" failed.
dpkg: error processing pve-cluster (--configure):
subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
redhat-cluster-pve depends on pve-cluster; however:
Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
dpkg: dependency problems prevent configuration of qemu-server:
qemu-server depends on pve-cluster; however:
Package pve-cluster is not configured yet.
qemu-server depends on redhat-cluster-pve; however:
Package redhat-cluster-pve is not configured yet.
dpkg: error processing qemu-server (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.
pve-manager depends on pve-cluster (>= 1.0-29); however:
Package pve-cluster is not configured yet.
pve-manager depends on redhat-cluster-pve; however:
Package redhat-cluster-pve is not configured yet.
dpkg: error processing pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
proxmox-ve-2.6.32 depends on pve-manager; however:
Package pve-manager is not configured yet.
proxmox-ve-2.6.32 depends on qemu-server; however:
Package qemu-server is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
configured to not write apport reports
Errors were encountered while processing:
pve-cluster
redhat-cluster-pve
qemu-server
pve-manager
proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
I have a debian squeeze, and some kvm server in production..
It seems that the system connot acces to /etc/pve, but I cannot mount, umount or fusermount -u /etc/pve I've got all the time an errors..
#umount /etc/pve
umount: /etc/pve: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
#fusermount -u /etc/pve
fusermount: failed to unmount /etc/pve: Device or resource busy
#mount /etc/pve
/bin/sh: /dev/fuse: Permission denied
But if i check with lsof or fuser..
#lsof /etc/pve
lsof: WARNING: can't stat() fuse file system /etc/pve
Output information may be incomplete.
lsof: status error on /etc/pve: Transport endpoint is not connected
lsof 4.81
latest revision: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/
latest FAQ: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/FAQ
latest man page: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/lsof_man
usage: [-?abhlnNoOPRtUvVX] [+|-c c] [+|-d s] [+D D] [+|-f[gG]]
[-F [f]] [-g] [-i ] [+|-L [l]] [+m [m]] [+|-M] [-o [o]] [-p s]
[+|-r [t]] [-s [p:s]] [-S [t]] [-T [t]] [-u s] [+|-w] [-x [fl]] [--] [names]
Use the ``-h'' option to get more help information.
#fuser /etc/pve
Cannot stat /etc/pve: Transport endpoint is not connected
So I think if I reboot the machine will not reboot properly and I have a production machine on it...
Anyone has an idée how I can solve this issue ?
Thanks in advance.
I would like to upgrade my system and I've got this issue bellow:
#apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
5 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue [Y/n]?
Setting up pve-cluster (1.0-33) ...
Restarting pve cluster filesystem: pve-clusterstart-stop-daemon: warning: failed to kill 2110: No such process
fuse: failed to access mountpoint /etc/pve: Transport endpoint is not connected
[main] crit: fuse_mount error: Transport endpoint is not connected
[main] notice: exit proxmox configuration filesystem (-1)
(warning).
invoke-rc.d: initscript pve-cluster, action "restart" failed.
dpkg: error processing pve-cluster (--configure):
subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
redhat-cluster-pve depends on pve-cluster; however:
Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
dpkg: dependency problems prevent configuration of qemu-server:
qemu-server depends on pve-cluster; however:
Package pve-cluster is not configured yet.
qemu-server depends on redhat-cluster-pve; however:
Package redhat-cluster-pve is not configured yet.
dpkg: error processing qemu-server (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.
pve-manager depends on pve-cluster (>= 1.0-29); however:
Package pve-cluster is not configured yet.
pve-manager depends on redhat-cluster-pve; however:
Package redhat-cluster-pve is not configured yet.
dpkg: error processing pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
proxmox-ve-2.6.32 depends on pve-manager; however:
Package pve-manager is not configured yet.
proxmox-ve-2.6.32 depends on qemu-server; however:
Package qemu-server is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
dependency problems - leaving unconfigured
configured to not write apport reports
configured to not write apport reports
Errors were encountered while processing:
pve-cluster
redhat-cluster-pve
qemu-server
pve-manager
proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
I have a debian squeeze, and some kvm server in production..
It seems that the system connot acces to /etc/pve, but I cannot mount, umount or fusermount -u /etc/pve I've got all the time an errors..
#umount /etc/pve
umount: /etc/pve: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
#fusermount -u /etc/pve
fusermount: failed to unmount /etc/pve: Device or resource busy
#mount /etc/pve
/bin/sh: /dev/fuse: Permission denied
But if i check with lsof or fuser..
#lsof /etc/pve
lsof: WARNING: can't stat() fuse file system /etc/pve
Output information may be incomplete.
lsof: status error on /etc/pve: Transport endpoint is not connected
lsof 4.81
latest revision: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/
latest FAQ: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/FAQ
latest man page: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/lsof_man
usage: [-?abhlnNoOPRtUvVX] [+|-c c] [+|-d s] [+D D] [+|-f[gG]]
[-F [f]] [-g
[+|-r [t]] [-s [p:s]] [-S [t]] [-T [t]] [-u s] [+|-w] [-x [fl]] [--] [names]
Use the ``-h'' option to get more help information.
#fuser /etc/pve
Cannot stat /etc/pve: Transport endpoint is not connected
So I think if I reboot the machine will not reboot properly and I have a production machine on it...
Anyone has an idée how I can solve this issue ?
Thanks in advance.
