Proxmox networking configuration

backkherozzo1985

New Member
Mar 25, 2014
12
0
1
Hi, I've a physical server with a network interface that have 2 public ip. I configure the networking as follow:

iface enp2s0 inet manual

auto vmbr0
iface vmbr0 inet static
address X.X.X.Y (public ip for the Proxmox GUI)
netmask X.X.X.X
gateway X.X.X.X
bridge-ports enp2s0
bridge-stp off
bridge-fd 0

#public
up route add -net X.X.X.X netmask X.X.X.X gw X.X.X.X vmbr0
up ip route add 192.168.0.0/16 via X.X.X.Y dev vmbr0
up ip route add 172.16.0.0/12 via X.X.X.Y dev vmbr0
up ip route add 10.0.0.0/8 via X.X.X.Y dev vmbr0
up sysctl -w net.ipv4.ip_forward=1
up sysctl -w net.ipv4.conf.enp2s0.send_redirects=0

auto vmbr1
iface vmbr1 inet manual
bridge-ports none
bridge-stp off
bridge-fd 0

I installed NGINX to the Proxmox server as a reverse proxy for access the Proxmox GUI to the 443 port and everything work without issue. Now I would forward the NGINX logs with syslog to the SIEM that I installed to the vmbr1 but I can't reach the SIEM vm from the Proxmox server. How a can solve this networking issue?

Thank you
R@ff
 

backkherozzo1985

New Member
Mar 25, 2014
12
0
1
good morning, I would configure NGINX for sending logs with syslog, but I can't reach the vm to the vmbr1 from the Proxmox server.

You can find attached the network diagram
 

Attachments

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!