Proxmox cluster no jobs :(

Mori

New Member
Jul 9, 2018
2
0
1
32
Hey.
I'm install servers:
1) SSD, cluster
2) SSD, node1
3) SSD, node2

All servers Debian 9.4 + final free proxmox (v5+)
hosts everywhere ok
ntp time:
cluster default
node1 > cluster
node2 > cluster

IGMP off:
echo 1 > /sys/devices/virtual/net/vmbr0/bridge/multicast_querier
reboot

Error node1:
[quorum] crit: quorum_initialize failed: 2
[confdb] crit: cmap_initialize failed: 2
[dcdb] crit: cpg_initialize failed: 2
[status] crit: cpg_initialize failed: 2

error with cfs lock 'file-replication_cfg': no quorum!
pvesr.service: Main process exited, code=exited, status=2/INVALI
Failed to start Proxmox VE replication runner.

systemd[1]: pvesr.service: Unit entered failed state.
systemd[1]: pvesr.service: Failed with result 'exit-code'.
pmxcfs[4171]: [quorum] crit: quorum_initialize failed: 2
pmxcfs[4171]: [confdb] crit: cmap_initialize failed: 2
pmxcfs[4171]: [dcdb] crit: cpg_initialize failed: 2
pmxcfs[4171]: [status] crit: cpg_initialize failed: 2
cron[1463]: (*system*vzdump) CAN'T OPEN SYMLINK (/etc/cron.d/vzdump)
pmxcfs[4171]: [quorum] crit: quorum_initialize failed: 2
pmxcfs[4171]: [confdb] crit: cmap_initialize failed: 2
pmxcfs[4171]: [dcdb] crit: cpg_initialize failed: 2
pmxcfs[4171]: [status] crit: cpg_initialize failed: 2
Error node2:
500 cluster not ready - no quorum?
use cluster:
pvecm e 1

error node2:
Login succeeded.
Request addition of this node
Join request OK, finishing setup locally
stopping pve-cluster service
backup old database to '/var/lib/pve-cluster/backup/config-1531123118.sql.gz'
Job for corosync.service failed because the control process exited with error code.
starting pve-cluster failed: See "systemctl status corosync.service" and "journalctl -xe" for details.

corosync[4318]: [WD ] no resources configured.
corosync[4318]: [SERV ] Service engine loaded: corosync watchdog service [7
corosync[4318]: [QUORUM] Using quorum provider corosync_votequorum
corosync[4318]: [QUORUM] Quorum provider: corosync_votequorum failed to init
corosync[4318]: [SERV ] Service engine 'corosync_quorum' failed to load for
corosync[4318]: [MAIN ] Corosync Cluster Engine exiting with status 20 at s
systemd[1]: corosync.service: Main process exited, code=exited, status=20/n/a
systemd[1]: Failed to start Corosync Cluster Engine.

systemd[1]: corosync.service: Unit entered failed state.
systemd[1]: corosync.service: Failed with result 'exit-code'.
pveproxy[2009]: ipcc_send_rec[1] failed: Connection refused
pveproxy[2009]: ipcc_send_rec[2] failed: Connection refused
pveproxy[2009]: ipcc_send_rec[3] failed: Connection refused
systemd[1]: Started The Proxmox VE cluster filesystem.
-- Subject: Unit pve-cluster.service has finished start-up
-- Defined-By: systemd
--
-- Unit pve-cluster.service has finished starting up.


pvecm[4287]: starting pve-cluster failed: See "systemctl status corosync.serv
pvecm[4285]: <root@pam> end task UPID:pxm8hz:000010BF:00016500:5B4315A5:clust
pmxcfs[4344]: [quorum] crit: quorum_initialize failed: 2
pmxcfs[4344]: [confdb] crit: cmap_initialize failed: 2
pmxcfs[4344]: [dcdb] crit: cpg_initialize failed: 2
pmxcfs[4344]: [status] crit: cpg_initialize failed: 2
Help me pls
I'm to Russian
 
echo 1 > /sys/devices/virtual/net/vmbr0/bridge/multicast_querier
This shouldn't be needed, it's on by default. Corosync needs multicast to work.
 
I created a cluster on server 1
Why is not there cman?

root@pxm1hz /etc # service cman restart
Failed to restart cman.service: Unit cman.service not found.

How do I set up a multicast?
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!