Hello, I'm making a research about onos potential in Hybrid SDN/IP network:
This is my configuration:[Network Configuration][1]
This is the inside of single node:
[Node Configuration][2]
I've used Open vSwitch to create virtual Bridge, according to the following configuration:
The standard route with IP traditional rules forward packets across this path:
(node1)--->(node2)---->(node3)
Obviously in each node, there are ovs switches that forward packets.
I'd like to discriminate UDP packets according this path:
(node1)--->(node1)
I used this ovs rules to send packets from Br-P2P1(node1) to br-int(node1), and from br-int (node1) to br-p1p2 (node1):
***rules of br-p2p1
sudo ovs-ofctl add-flow br-p2p1 in_port=LOCAL,actions=output:'PORT_LINK_TO_p2p1'
sudo ovs-ofctl add-flow br-p2p1 in_port='PORT_LINK_TO_p2p1',actions=LOCAL
sudo ovs-ofctl add-flow br-p2p1 ip,udp,nw_dst='IP_DESTINATION',in_port=1,actions
utput:''PORT_LINK_TO_br-int'
***rules of br-int
sudo ovs-ofctl add-flow br-int in_port='PORT_PATCH_A',actions=output:'PORT_PATCH_B'
Unfortunally br-int doesn't "see" any packets, I think rule is
not applied. I try to send UDP packet with traceroute from source to destination hosts.
[1]: http://i.stack.imgur.com/1qyAO.png
[2]: http://i.stack.imgur.com/ImmxZ.png
This is my configuration:[Network Configuration][1]
This is the inside of single node:
[Node Configuration][2]
I've used Open vSwitch to create virtual Bridge, according to the following configuration:
The standard route with IP traditional rules forward packets across this path:
(node1)--->(node2)---->(node3)
Obviously in each node, there are ovs switches that forward packets.
I'd like to discriminate UDP packets according this path:
(node1)--->(node1)
I used this ovs rules to send packets from Br-P2P1(node1) to br-int(node1), and from br-int (node1) to br-p1p2 (node1):
***rules of br-p2p1
sudo ovs-ofctl add-flow br-p2p1 in_port=LOCAL,actions=output:'PORT_LINK_TO_p2p1'
sudo ovs-ofctl add-flow br-p2p1 in_port='PORT_LINK_TO_p2p1',actions=LOCAL
sudo ovs-ofctl add-flow br-p2p1 ip,udp,nw_dst='IP_DESTINATION',in_port=1,actions
utput:''PORT_LINK_TO_br-int'***rules of br-int
sudo ovs-ofctl add-flow br-int in_port='PORT_PATCH_A',actions=output:'PORT_PATCH_B'
Unfortunally br-int doesn't "see" any packets, I think rule is
not applied. I try to send UDP packet with traceroute from source to destination hosts.
[1]: http://i.stack.imgur.com/1qyAO.png
[2]: http://i.stack.imgur.com/ImmxZ.png