Hi Guys,
I installed ProxMox on my NUC5i7RYH all is working fine so far.
However, I am unable to add USB devices to virtual machines, they don't show up in the virtual machine at all.
What I have tried so far:
- Checked BIOS/UEFI settings and enabled virtualization technology.
Screenshot: http://pic1.ir-support.nl/image.php?di=S7QW
- Followed this article:
https://pve.proxmox.com/wiki/USB_Devices_in_Virtual_Machines
root@proxmox:~# lsusb | grep King
Bus 001 Device 002: ID 0951:1643 Kingston Technology DataTraveler G3
root@proxmox:~# qm set 100 -usb0 host=0951:1643
update VM 100: -usb0 host=0951:1643
root@proxmox:~# qm set 100 -usb0 host=0951:1643
update VM 100: -usb0 host=0951:1643
root@proxmox:~# cat /etc/pve/qemu-server/100.conf
bootdisk: ide0
cores: 4
ide0: local:100/vm-100-disk-1.qcow2,backup=no,size=32G
memory: 4096
name: Windows7Prox64
net0: e1000=32:62:38:31:38:66,bridge=vmbr0
numa: 0
ostype: win7
smbios1: uuid=3452f9bd-d447-4217-bb3a-06b16cb517b5
sockets: 1
usb0: host=0951:1643
Rebooted client afterwards, USB device is not showing up.
- Tried to add the USB device to a Windows 7 client and a Debian 8 machine both fail
- Tried a USB2 and USB3 key
My apologies for my bad English, all suggestions are welcome.
--
Edit (Working for USB3 Now if I manually add it, when running, adding it in the config file so it will be loaded during boot does still not work):
device_add nec-usb-xhci,id=xhci,addr=0x5
device_add usb-host,bus=xhci.0,vendorid=0x1058,productid=0x107c
I installed ProxMox on my NUC5i7RYH all is working fine so far.
However, I am unable to add USB devices to virtual machines, they don't show up in the virtual machine at all.
What I have tried so far:
- Checked BIOS/UEFI settings and enabled virtualization technology.
Screenshot: http://pic1.ir-support.nl/image.php?di=S7QW
- Followed this article:
https://pve.proxmox.com/wiki/USB_Devices_in_Virtual_Machines
root@proxmox:~# lsusb | grep King
Bus 001 Device 002: ID 0951:1643 Kingston Technology DataTraveler G3
root@proxmox:~# qm set 100 -usb0 host=0951:1643
update VM 100: -usb0 host=0951:1643
root@proxmox:~# qm set 100 -usb0 host=0951:1643
update VM 100: -usb0 host=0951:1643
root@proxmox:~# cat /etc/pve/qemu-server/100.conf
bootdisk: ide0
cores: 4
ide0: local:100/vm-100-disk-1.qcow2,backup=no,size=32G
memory: 4096
name: Windows7Prox64
net0: e1000=32:62:38:31:38:66,bridge=vmbr0
numa: 0
ostype: win7
smbios1: uuid=3452f9bd-d447-4217-bb3a-06b16cb517b5
sockets: 1
usb0: host=0951:1643
Rebooted client afterwards, USB device is not showing up.
- Tried to add the USB device to a Windows 7 client and a Debian 8 machine both fail
- Tried a USB2 and USB3 key
My apologies for my bad English, all suggestions are welcome.
--
Edit (Working for USB3 Now if I manually add it, when running, adding it in the config file so it will be loaded during boot does still not work):
device_add nec-usb-xhci,id=xhci,addr=0x5
device_add usb-host,bus=xhci.0,vendorid=0x1058,productid=0x107c
Last edited: