NIC occasionally disables itself

Animoski

New Member
Aug 7, 2012
9
0
1
I've updated to the latest pve-test repository not too long ago because it was suggest by tom (I believe) that it will include a newer set of drivers for the E1000E network cards (which i'm not even using in my system at all) and it causes this following issue (similar and still)

I'm running Version: 2.2-21/8f343d5a

Oct 19 18:32:49 zeus kernel: ------------[ cut here ]------------
Oct 19 18:32:49 zeus kernel: WARNING: at net/sched/sch_generic.c:267 dev_watchdog+0x26d/0x280() (Not tainted)
Oct 19 18:32:49 zeus kernel: Hardware name: X9SCL/X9SCM
Oct 19 18:32:49 zeus kernel: NETDEV WATCHDOG: eth1 (e1000e): transmit queue 0 timed out
Oct 19 18:32:49 zeus kernel: Modules linked in: vzethdev vznetdev pio_nfs pio_direct pfmt_raw pfmt_ploop1 ploop simfs vzrst nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 vzcpt nfs lockd fscache nfs_acl auth_rpcgss sunrpc nf_conntrack vzdquota vzmon vzdev ip6t_REJECT ip6table_mangle ip6table_filter ip6_tables xt_length vhost_net xt_hl xt_tcpmss macvtap xt_TCPMSS macvlan iptable_mangle iptable_filter xt_multiport xt_limit tun xt_dscp ipt_REJECT ip_tables kvm_intel kvm vzevent ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse snd_pcsp snd_pcm snd_timer video i2c_i801 tpm_tis tpm tpm_bios serio_raw i2c_core snd shpchp output soundcore snd_page_alloc ext3 jbd mbcache ahci e1000e [last unloaded: scsi_wait_scan]
Oct 19 18:32:49 zeus kernel: Pid: 4, comm: ksoftirqd/0 veid: 0 Not tainted 2.6.32-15-pve #1
Oct 19 18:32:49 zeus kernel: Call Trace:
Oct 19 18:32:49 zeus kernel: <IRQ> [<ffffffff8106c608>] ? warn_slowpath_common+0x88/0xc0
Oct 19 18:32:49 zeus kernel: [<ffffffff8106c6f6>] ? warn_slowpath_fmt+0x46/0x50
Oct 19 18:32:49 zeus kernel: [<ffffffff8147c6fd>] ? dev_watchdog+0x26d/0x280
Oct 19 18:32:49 zeus kernel: [<ffffffff8107fcac>] ? run_timer_softirq+0x1bc/0x380
Oct 19 18:32:49 zeus kernel: [<ffffffff8147c490>] ? dev_watchdog+0x0/0x280
Oct 19 18:32:49 zeus kernel: [<ffffffff81075413>] ? __do_softirq+0x103/0x260
Oct 19 18:32:49 zeus kernel: [<ffffffff8100c30c>] ? call_softirq+0x1c/0x30
Oct 19 18:32:49 zeus kernel: <EOI> [<ffffffff8100df35>] ? do_softirq+0x65/0xa0
Oct 19 18:32:49 zeus kernel: [<ffffffff81074f70>] ? ksoftirqd+0x80/0x110
Oct 19 18:32:49 zeus kernel: [<ffffffff81074ef0>] ? ksoftirqd+0x0/0x110
Oct 19 18:32:49 zeus kernel: [<ffffffff81095706>] ? kthread+0x96/0xa0
Oct 19 18:32:49 zeus kernel: [<ffffffff8100c20a>] ? child_rip+0xa/0x20
Oct 19 18:32:49 zeus kernel: [<ffffffff81095670>] ? kthread+0x0/0xa0
Oct 19 18:32:49 zeus kernel: [<ffffffff8100c200>] ? child_rip+0x0/0x20
Oct 19 18:32:49 zeus kernel: ---[ end trace 0640dc89a4ae5add ]---
Oct 19 18:32:49 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:32:49 zeus kernel: e1000e 0000:02:00.0: eth1: Error reading PHY register
Oct 19 18:32:49 zeus kernel: e1000e: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 19 18:32:59 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:32:59 zeus kernel: e1000e 0000:02:00.0: eth1: Error reading PHY register
Oct 19 18:32:59 zeus kernel: e1000e: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 19 18:33:09 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:33:09 zeus kernel: e1000e 0000:02:00.0: eth1: Error reading PHY register
Oct 19 18:33:09 zeus kernel: e1000e: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 19 18:33:19 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:33:19 zeus kernel: e1000e 0000:02:00.0: eth1: Error reading PHY register
Oct 19 18:33:19 zeus kernel: e1000e: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 19 18:33:29 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:33:29 zeus kernel: e1000e 0000:02:00.0: eth1: Error reading PHY register
Oct 19 18:33:29 zeus kernel: e1000e: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 19 18:33:59 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:33:59 zeus kernel: e1000e 0000:02:00.0: eth1: Error reading PHY register
Oct 19 18:33:59 zeus kernel: e1000e: e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 19 18:35:54 zeus kernel: e1000e 0000:02:00.0: eth1: Reset adapter
Oct 19 18:35:54 zeus kernel: vmbr0: port 1(eth1) entering disabled state
Oct 19 18:47:55 zeus kernel: imklog 4.6.4, log source = /proc/kmsg started.
 

tom

Proxmox Staff Member
Staff member
Aug 29, 2006
15,525
911
163
upgrade to latest kernel and try again (2.6.32-16 from pvetest)
 

Animoski

New Member
Aug 7, 2012
9
0
1
I am already running the latest kernel off of pvetest - and confirmed it's running on 2.6.32-16
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!