Network Interface Card not showing in Proxmox Node Network

[alonewolfgamer]

So I have a dual port network interface card but I am not sure which driver does it use I only know that yokogawa makes this card.When I bought a cheap homeserver it was built in I tried pci passthrough on opnsense/pfsense both were not detected so what can I do about this card ?
I have attached the required pictures.

 

[sterzy]

Hey, can you run the command lspci -nnk and post the output? Preferably as text between [code][/code] tags

 

[alonewolfgamer]

Hey, can you run the command lspci -nnk and post the output? Preferably as text between [code][/code] tags

This is the output.
https://ctxt.io/2/AADoCy8KFg

 

[sterzy]

These devices seem to currently be assigned the vfio-pci driver [1]. This is usually the case when you provide a PCI device as a virtual function to a VM. I am generally not familiar with these devices, but what do you intend to do with them?

[1]: https://www.kernel.org/doc/html/latest/driver-api/vfio.html

 

[alonewolfgamer]

These devices seem to currently be assigned the vfio-pci driver [1]. This is usually the case when you provide a PCI device as a virtual function to a VM. I am generally not familiar with these devices, but what do you intend to do with them?

[1]: https://www.kernel.org/doc/html/latest/driver-api/vfio.html

Actually I wanted to pass to a VM but when I pass them to a VM they have no internet nor were they detected in the VM.

 

[sterzy]

Actually I wanted to pass to a VM but when I pass them to a VM they have no internet nor were they detected in the VM.

Well, it will depend on the VMs in question, but you should be able to follow our PCI Passthrough guide here [1].

[1]: https://pve.proxmox.com/wiki/PCI_Passthrough