Hi guys.
Just installed Proxmox. first time.
I have a unifi based network.
vLan0 = 172.16.10.0/24 -> 2.5GbE /Cat6
host ip is 172.16.10.61 - Primary IP/Management interface.
I have a vLan30 172.16.30.0 - Host ip suppose to be 172.16.30.11 -> vMotion
I have a vLan40 172.16.40.0 - Host ip suppose to be 172.16.40.11 -> This is going to be a storage vlan to my TrueNAS scale
don't an idea how where to start.
for now all the vLan's run over 2.5GbE Cat6 copper, I'm going to move vLan40 onto 10GbE SFP+ based Fiber.
Can do with some assistance to get the network side configured. vLan's defined and configured onto the current single 2.5GbE interface.
This will end being a 5 node proxmox cluster, running some odd VM's and a K3S or K8S cluster.
G
Just installed Proxmox. first time.
I have a unifi based network.
vLan0 = 172.16.10.0/24 -> 2.5GbE /Cat6
host ip is 172.16.10.61 - Primary IP/Management interface.
I have a vLan30 172.16.30.0 - Host ip suppose to be 172.16.30.11 -> vMotion
I have a vLan40 172.16.40.0 - Host ip suppose to be 172.16.40.11 -> This is going to be a storage vlan to my TrueNAS scale
don't an idea how where to start.
for now all the vLan's run over 2.5GbE Cat6 copper, I'm going to move vLan40 onto 10GbE SFP+ based Fiber.
Can do with some assistance to get the network side configured. vLan's defined and configured onto the current single 2.5GbE interface.
This will end being a 5 node proxmox cluster, running some odd VM's and a K3S or K8S cluster.
G
Last edited: