[SOLVED] Is there a problem with the actual PVE 4.2 installer? Installations not possible at the time!

[fireon]

Hello

For first example found this https://forum.proxmox.com/threads/c...istent-net-rules-read-only-file-system.27431/
But it's not the only one. Found some similar problems with the new 4.2 installer. In the office we use this time the PVE 4.1 and then upgrade to 4.2. It was the only way install PVE this time. We had two HP machines. One little ML10 an one DLXXX don't now the right number now. Dell machine (R730).

A lot of errors with "can't insert module XXX". So we installed with 4.1 and there was no problem.

So my Question: Is there an known problem with the installer? Or something special changed?

Thanks

 

[Sinderella]

I had the same issue with ML10 Gen9. I followed your instructions, and it seems that it's the problem with 4.2 installer. I have no issue with 4.1 either. Thanks to you for pointing that out.

 

[fireon]

It's look like really depending on special hardware. Never had this error again.