HP p410i RAID no HDD SMART info

tanaki

New Member
Mar 18, 2022
1
0
1
52
Hello,

I've got HP DL360 G7 with P410i Smart array controller . Unforunately PVE is unable to show HDDs SMART status.
Is there some workaround ?

smart.jpg
Actual error :
error.jpg



HP repo already installed:


repo.jpg

PVE version:

proxmox-ve: 7.1-1 (running kernel: 5.13.19-6-pve)
pve-manager: 7.1-10 (running version: 7.1-10/6ddebafe)
pve-kernel-helper: 7.1-12
pve-kernel-5.13: 7.1-9
pve-kernel-5.13.19-6-pve: 5.13.19-14
pve-kernel-5.13.19-5-pve: 5.13.19-13
pve-kernel-5.13.19-4-pve: 5.13.19-9
pve-kernel-5.13.19-3-pve: 5.13.19-7
pve-kernel-5.13.19-2-pve: 5.13.19-4
ceph-fuse: 15.2.15-pve1
corosync: 3.1.5-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.22-pve2
libproxmox-acme-perl: 1.4.1
libproxmox-backup-qemu0: 1.2.0-1
libpve-access-control: 7.1-6
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.1-3
libpve-guest-common-perl: 4.1-1
libpve-http-server-perl: 4.1-1
libpve-storage-perl: 7.1-1
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 4.0.11-1
lxcfs: 4.0.11-pve1
novnc-pve: 1.3.0-2
proxmox-backup-client: 2.1.5-1
proxmox-backup-file-restore: 2.1.5-1
proxmox-mini-journalreader: 1.3-1
proxmox-widget-toolkit: 3.4-7
pve-cluster: 7.1-3
pve-container: 4.1-4
pve-docs: 7.1-2
pve-edk2-firmware: 3.20210831-2
pve-firewall: 4.2-5
pve-firmware: 3.3-5
pve-ha-manager: 3.3-3
pve-i18n: 2.6-2
pve-qemu-kvm: 6.1.1-2
pve-xtermjs: 4.16.0-1
qemu-server: 7.1-4
smartmontools: 7.2-1
spiceterm: 3.2-2
swtpm: 0.7.1~bpo11+1
vncterm: 1.7-1
zfsutils-linux: 2.1.2-pve1
 
Last edited:
Typically RAID controllers encapsulate that information and do not necessarily provide this to the OS.
The logical volume you create ist an abstraction of the physical world.
Hence you need typically additional tools to get to that data.
 
  • Like
Reactions: truaswild

HP Array Configuration Utility Command Line Interface​


This may be the thing you are looking for. But that won't populate the data into the webui either. Just cli