### How to use DHCP to manager PVE instead of setting a static IP for PVE LAN ?
> I prefer to using DHCP than a static IP address to manager PVE. And how to set? For example,the default config is as this:
- /etc/network/interfaces
```
auto lo
iface lo inet loopback
iface eno1 inet manual
auto vmbr0
iface vmbr0 inet static
address 192.168.1.93
netmask 255.255.255.0
gateway 192.168.1.1
bridge_ports eno1
bridge_stp off
bridge_fd 0
```
- /etc/hosts
```
...
192.168.1.93 pve.admin.lan
```
- /etc/issue
```
https://192.168.1.93:8006/
```
---
> Declare as this ?
```
auto lo
iface lo inet loopback
auto eno1
iface eno1 inet dhcp
auto vmbr0
iface vmbr0 inet dhcp
bridge_ports eno1
bridge_stp off
bridge_fd 0
```
- /etc/issue
```
https://0.0.0.0:8006/
```
- /etc/hosts
```
...
127.0.0.1 pve.admin.lan
```
> Is this right?
> I prefer to using DHCP than a static IP address to manager PVE. And how to set? For example,the default config is as this:
- /etc/network/interfaces
```
auto lo
iface lo inet loopback
iface eno1 inet manual
auto vmbr0
iface vmbr0 inet static
address 192.168.1.93
netmask 255.255.255.0
gateway 192.168.1.1
bridge_ports eno1
bridge_stp off
bridge_fd 0
```
- /etc/hosts
```
...
192.168.1.93 pve.admin.lan
```
- /etc/issue
```
https://192.168.1.93:8006/
```
---
> Declare as this ?
```
auto lo
iface lo inet loopback
auto eno1
iface eno1 inet dhcp
auto vmbr0
iface vmbr0 inet dhcp
bridge_ports eno1
bridge_stp off
bridge_fd 0
```
- /etc/issue
```
https://0.0.0.0:8006/
```
- /etc/hosts
```
...
127.0.0.1 pve.admin.lan
```
> Is this right?