Host 'x.x.x.x' is not cluster master on different NIC

[check-ict]

Hello,

I want to setup a new Proxmox cluster with direct connection.

The servers have 2 1Gbit nics and 2 10Gbit nics.

I want the servers to cumminicate with the 10Gbit link, wich is eth2.

When I try to create a cluster, using the direct IP's that I configured on eth2 at both machines, I get the error: host '10.10.10.11' is not cluster master.

When I use the IP of eth0/vmbr0 it works, but I want to use a faster link for internal communication.

How can I solve this?

 

[tom]

cluster communication works either with eth0 or vmbr0. so try adding eth2 to vmbr0 (instead of eth0).

 

[check-ict]

Hello Tom,

eth0 and eth1 are for normal usage.

vmbr0 can be created on eth2, but I don't have a gateway anymore since the servers are connected directly to each other.

Should I manipulate the eth device numbers in udev/rules.d?