HA Cluster for LXC Storage Selection

[Lukas Räpple]

Good Morning,
We would like to create following setup:

- HA Cluster with 2 or 3 proxmox nodes. Later there should be around 50 LXC Containers running on top of it
- This Cluster will only be used for LXC Container. So there are no requirements for VM usage
- Required are all Features: Automatic Migration when one Node goes down, Snapshots of Container
- SAN as shared Storage, which is connected over FC and uses FCP. (EMC Unity SAN)

Now the big question: Is this setup even achievable with using SAN instead of Ceph Storage?

ZFS over iSCSI seems to fit our requirements but after checking the technology i found out it doesn't support LXC (Is this true?)

Anny Suggestions? Has anybody done this before?

 

[sb-jw]

LXC Container can't be live migrated. So it's not really usable for HA requirements.

 

[Lukas Räpple]

LXC Container can't be live migrated. So it's not really usable for HA requirements.

Ok thank you very much!
Do you know if ZFS over iSCSI supports LXC?
I read taht it doesn't but i never saw a official statement on the proxmox website

 

[LnxBil]

Do you know if ZFS over iSCSI supports LXC?
I read taht it doesn't but i never saw a official statement on the proxmox website

I wanted that for a long time, but it is not there yet. It then should be named ZFS over NFS and should be fairly easy implementable.