Emmergency Error / Harddrive

[marvintv]

Hello Guys

i have a dedicated server with 2x 1TB SSD and 2x1TB HDD

They are correctly mounted and added in proxmox.

But now i have the problem if i create 1 vm on the HDDs it works fine, but after install the second or more vm i get the problem that (for example debian) i can install the os and the storage i added to this vm is shown up but after the reboot the hdd is gone and the vm dosnt recognize it.

I already tryed diffrenct Controller Types like VmWare, where at least the hdd / storage is shown up but if i try to boot it redirects me into grub boot loader

Screen Attached Including Config

 

[floh8]

Hello Guys

i have a dedicated server with 2x 1TB SSD and 2x1TB HDD

They are correctly mounted and added in proxmox.

how?

But now i have the problem if i create 1 vm on the HDDs it works fine, but after install the second or more vm i get the problem that (for example debian) i can install the os and the storage i added to this vm is shown up but after the reboot the hdd is gone and the vm dosnt recognize it.

use firstly no virtio. than install virtio-driver inside vm. change than

I already tryed diffrenct Controller Types like VmWare, where at least the hdd / storage is shown up but if i try to boot it redirects me into grub boot loader

Screen Attached Including Config

 

[marvintv]

how?

use firstly no virtio. than install virtio-driver inside vm. change than

Hello

Virtio Driver is installed on the VM, didnt work too. I included it inside the iso because i cant boot the vm.


Second i attached a picture of the Drives configuration.

Thanks

 

[Dunuin]

You HDD is missing a GPT and you didn't created a partition for your LVM. Are you sure thats right?

 

[floh8]

i only see 2 drives. where are the rest?

 

[Dunuin]

i only see 2 drives. where are the rest?

I would guess its HW raid (Model for both disks is MR9260-4i which is a LSI raid controller).

 

[floh8]

is this right?
the modell info say yes. ok.

 

[floh8]

so try it without virtio. controller scsi

 

[marvintv]

I would guess its HW raid (Model for both disks is MR9260-4i which is a LSI raid controller).

correct its a hw raid

 

[marvintv]

You HDD is missing a GPT and you didn't created a partition for your LVM. Are you sure thats right?

oh ye see that, i dont know why its again without. Had the same issue a while ago. Its kicking itself out. idk why

 

[marvintv]

so try it without virtio. controller scsi

Still facing the issue

 

[floh8]

please test the raid function and create files there manually

 

[marvintv]

please test the raid function and create files there manually

i tested the raid now completly it works fine i cant find any problem there

 

[floh8]

show the image files

 

[marvintv]

From the raid? Its setup correctly in raid 1, there isnt a lot to show. And if the Raid have a problem why works the first vm ?

 

[floh8]

u will say that the imagefiles were created for the 1. vm and stay and they were gone for the next vms?
then show the files!

 

[marvintv]

See attached Pics!

 

[marvintv]

Weird is too that the second vm is visible there but cant be run

 

[floh8]

show your LVs!

 

[marvintv]