Hello, I have Asrock J4105M mobo with proxmox 5.3 and Intel dual network card which I would like to pass to pfSense. 04:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev ff) 04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev ff) When I pass second port everything works, but first will not work (and both ports too), VM does not start and I have got this error in proxmox dmesg: [ 7092.974659] vfio-pci 0000:04:00.0: enabling device (0000 -> 0003) [ 7310.899332] vfio-pci 0000:04:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 7312.147302] vfio-pci 0000:04:00.0: not ready 1123ms after FLR; waiting [ 7313.203358] vfio-pci 0000:04:00.0: not ready 2147ms after FLR; waiting [ 7315.411374] vfio-pci 0000:04:00.0: not ready 4195ms after FLR; waiting [ 7319.763427] vfio-pci 0000:04:00.0: not ready 8291ms after FLR; waiting [ 7328.211534] vfio-pci 0000:04:00.0: not ready 16483ms after FLR; waiting [ 7345.363723] vfio-pci 0000:04:00.0: not ready 32867ms after FLR; waiting [ 7380.180128] vfio-pci 0000:04:00.0: not ready 65635ms after FLR; giving up [ 7455.397017] vfio-pci 0000:04:00.0: Refused to change power state, currently in D3 [ 7456.149009] vfio-pci 0000:04:00.0: timed out waiting for pending transaction; performing function level reset anyway [ 7457.397053] vfio-pci 0000:04:00.0: not ready 1123ms after FLR; waiting [ 7458.453037] vfio-pci 0000:04:00.0: not ready 2147ms after FLR; waiting [ 7460.565062] vfio-pci 0000:04:00.0: not ready 4195ms after FLR; waiting [ 7464.917111] vfio-pci 0000:04:00.0: not ready 8291ms after FLR; waiting [ 7473.365180] vfio-pci 0000:04:00.0: not ready 16483ms after FLR; waiting any help will be appreciated
Thank for you answer; but unfortunately when I pass 04:00 the pfSense cannot find any network interfaces ... (it should work as it works when I pass second port only)