Buenas Tardes, espero todos se encuentren bien es un gusto saludarles.
Actualmente me encuentro en un dilema sobre que modo implementar para el control de las unidades de almacenamineto.
Resulta que adquirí el Servidor DELL PowerEdge R450 y tengo tiempo investigando acerca de proxmox y quise implementar proxmox en este servidor.
El primer dilema con el que me he encontrado es que tipo de sistema usar para la gestión de las unidades de almacenamiento, si usar el controlador raid que trajo el servidor (Dell Controlador RAID PERC H745) en RAID10 o el ZFS de Proxmox en RAID10...
He estado investigando y me encontrado con la preferencia de usar ZFS antes HW RAID, por diversas razones...
Por tal motivo entre a la utilidad Raid Controller de la tarjeta raid y cambie del modo RAID Controller a modo HBA, lo que me convirtio los discos fisicos (SAS 600GB 12Gb 15K * 4Unidades) a Non-RAID...
Ahora tengo mis dudas sobre esto...
Por lo que si alguién tiene más conociemiento en este tema y me pudiera orientar estuviera muy agradecido.
Gracias...
https://www.deepl.com/translator
Deepltraductor:
Good afternoon, I hope everyone is well and it is a pleasure to greet you.
I am currently in a dilemma about what mode to implement for the control of the storage units.
It turns out that I acquired the DELL PowerEdge R450 Server and I have some time researching about proxmox and I wanted to implement proxmox on this server.
The first dilemma I have encountered is what kind of system to use for managing the storage drives, whether to use the raid controller that the server came with (Dell PERC H745 RAID Controller) in RAID10 or Proxmox's ZFS in RAID10....
I have been doing some research and I found myself with the preference of using ZFS before HW RAID, for several reasons...
For that reason I went into the Raid Controller utility of the raid card and switched from RAID Controller mode to HBA mode, which converted the physical disks (SAS 600GB 12Gb 15K * 4Drives) to Non-RAID...
Now I have my doubts about this...
So if someone has more knowledge on this subject and could guide me I would be very grateful.
Thank you...
Translated with www.DeepL.com/Translator (free version)
Actualmente me encuentro en un dilema sobre que modo implementar para el control de las unidades de almacenamineto.
Resulta que adquirí el Servidor DELL PowerEdge R450 y tengo tiempo investigando acerca de proxmox y quise implementar proxmox en este servidor.
El primer dilema con el que me he encontrado es que tipo de sistema usar para la gestión de las unidades de almacenamiento, si usar el controlador raid que trajo el servidor (Dell Controlador RAID PERC H745) en RAID10 o el ZFS de Proxmox en RAID10...
He estado investigando y me encontrado con la preferencia de usar ZFS antes HW RAID, por diversas razones...
Por tal motivo entre a la utilidad Raid Controller de la tarjeta raid y cambie del modo RAID Controller a modo HBA, lo que me convirtio los discos fisicos (SAS 600GB 12Gb 15K * 4Unidades) a Non-RAID...
Ahora tengo mis dudas sobre esto...
Por lo que si alguién tiene más conociemiento en este tema y me pudiera orientar estuviera muy agradecido.
Gracias...
https://www.deepl.com/translator
Deepltraductor:
Good afternoon, I hope everyone is well and it is a pleasure to greet you.
I am currently in a dilemma about what mode to implement for the control of the storage units.
It turns out that I acquired the DELL PowerEdge R450 Server and I have some time researching about proxmox and I wanted to implement proxmox on this server.
The first dilemma I have encountered is what kind of system to use for managing the storage drives, whether to use the raid controller that the server came with (Dell PERC H745 RAID Controller) in RAID10 or Proxmox's ZFS in RAID10....
I have been doing some research and I found myself with the preference of using ZFS before HW RAID, for several reasons...
For that reason I went into the Raid Controller utility of the raid card and switched from RAID Controller mode to HBA mode, which converted the physical disks (SAS 600GB 12Gb 15K * 4Drives) to Non-RAID...
Now I have my doubts about this...
So if someone has more knowledge on this subject and could guide me I would be very grateful.
Thank you...
Translated with www.DeepL.com/Translator (free version)