Hi,
I have a 3-node cluster and I want to install and configure Ceph.
For Ceph I have defined a dedicated network with 40GBit card (Mellanox Technologies MT27500 Family [ConnectX-3]): 192.168.100.8/29
This is the IP configuration of the nodes:
node 1: 192.168.100.11
node 2: 192.168.100.12
node 3: 192.168.100.13
After installing Ceph successfully with this command pveceph install --version luminous I want to start initialization according to wiki.
However this step fails!
root@ld4257:~# pveceph init --network 192.168.100.8/29
Ceph Luminous required - please run 'pveceph install'
But Ceph is already installed.
root@ld4257:~# pveceph install --version luminous
update available package list
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
ceph ist schon die neueste Version (10.2.5-7.2).
ceph-common ist schon die neueste Version (10.2.5-7.2).
gdisk ist schon die neueste Version (1.0.1-1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
root@ld4257:~# pveversion -v
proxmox-ve: 5.2-2 (running kernel: 4.15.18-1-pve)
pve-manager: 5.2-5 (running version: 5.2-5/eb24855a)
pve-kernel-4.15: 5.2-4
pve-kernel-4.15.18-1-pve: 4.15.18-15
pve-kernel-4.15.17-3-pve: 4.15.17-14
pve-kernel-4.15.17-1-pve: 4.15.17-9
ceph: 10.2.5-7.2
corosync: 2.4.2-pve5
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.0-8
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-35
libpve-guest-common-perl: 2.0-17
libpve-http-server-perl: 2.0-9
libpve-storage-perl: 5.0-24
libqb0: 1.0.1-1
lvm2: 2.02.168-pve6
lxc-pve: 3.0.0-3
lxcfs: 3.0.0-1
novnc-pve: 1.0.0-1
proxmox-widget-toolkit: 1.0-19
pve-cluster: 5.0-28
pve-container: 2.0-24
pve-docs: 5.2-4
pve-firewall: 3.0-13
pve-firmware: 2.0-5
pve-ha-manager: 2.0-5
pve-i18n: 1.0-6
pve-libspice-server1: 0.12.8-3
pve-qemu-kvm: 2.11.2-1
pve-xtermjs: 1.0-5
qemu-server: 5.0-29
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.9-pve1~bpo9
What's causing this error?
I have a 3-node cluster and I want to install and configure Ceph.
For Ceph I have defined a dedicated network with 40GBit card (Mellanox Technologies MT27500 Family [ConnectX-3]): 192.168.100.8/29
This is the IP configuration of the nodes:
node 1: 192.168.100.11
node 2: 192.168.100.12
node 3: 192.168.100.13
After installing Ceph successfully with this command pveceph install --version luminous I want to start initialization according to wiki.
However this step fails!
root@ld4257:~# pveceph init --network 192.168.100.8/29
Ceph Luminous required - please run 'pveceph install'
But Ceph is already installed.
root@ld4257:~# pveceph install --version luminous
update available package list
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
ceph ist schon die neueste Version (10.2.5-7.2).
ceph-common ist schon die neueste Version (10.2.5-7.2).
gdisk ist schon die neueste Version (1.0.1-1).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
root@ld4257:~# pveversion -v
proxmox-ve: 5.2-2 (running kernel: 4.15.18-1-pve)
pve-manager: 5.2-5 (running version: 5.2-5/eb24855a)
pve-kernel-4.15: 5.2-4
pve-kernel-4.15.18-1-pve: 4.15.18-15
pve-kernel-4.15.17-3-pve: 4.15.17-14
pve-kernel-4.15.17-1-pve: 4.15.17-9
ceph: 10.2.5-7.2
corosync: 2.4.2-pve5
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.0-8
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-35
libpve-guest-common-perl: 2.0-17
libpve-http-server-perl: 2.0-9
libpve-storage-perl: 5.0-24
libqb0: 1.0.1-1
lvm2: 2.02.168-pve6
lxc-pve: 3.0.0-3
lxcfs: 3.0.0-1
novnc-pve: 1.0.0-1
proxmox-widget-toolkit: 1.0-19
pve-cluster: 5.0-28
pve-container: 2.0-24
pve-docs: 5.2-4
pve-firewall: 3.0-13
pve-firmware: 2.0-5
pve-ha-manager: 2.0-5
pve-i18n: 1.0-6
pve-libspice-server1: 0.12.8-3
pve-qemu-kvm: 2.11.2-1
pve-xtermjs: 1.0-5
qemu-server: 5.0-29
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.9-pve1~bpo9
What's causing this error?
Last edited: