about ceph:unexpected property 'authsupported'

[lynn_yudi]

hi, in the backup vm info,about unexpected authsupported
......
INFO: status = stopped
INFO: file /etc/pve/storage.cfg line 10 (section 'ceph') - unable to parse value of 'authsupported': unexpected property 'authsupported'
INFO: backup mode: stop
INFO: ionice priority: 7
......

# pvesm list ceph
file /etc/pve/storage.cfg line 36 (section 'ceph') - unable to parse value of 'authsupported': unexpected property 'authsupported'
ceph:vm-105-disk-1 raw 17179869184 105
ceph:vm-105-disk-2 raw 68719476736 105

storage.cfg section:
rbd: ceph
monhost 172.16.100.101:6789;172.16.100.102:6789;172.16.100.103:6789
pool rbd
username admin
authsupported cephx;none
content images

add rbd storage by gui,no authsupported option in the storage.cfg

# pveversion -v
pve-manager: 2.3-10 (pve-manager/2.3/499c7b4d)
running kernel: 2.6.32-18-pve
proxmox-ve-2.6.32: 2.3-88
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-18-pve: 2.6.32-88
pve-kernel-2.6.32-16-verycloud: 2.6.32-82
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-4
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-36
qemu-server: 2.3-13
pve-firmware: 1.0-21
libpve-common-perl: 1.0-48
libpve-access-control: 1.0-25
libpve-storage-perl: 2.3-3
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.4-6
ksm-control-daemon: 1.1-1

 

[spirit]

hi, in the backup vm info,about unexpected authsupported
......
INFO: status = stopped
INFO: file /etc/pve/storage.cfg line 10 (section 'ceph') - unable to parse value of 'authsupported': unexpected property 'authsupported'
INFO: backup mode: stop
INFO: ionice priority: 7
......

# pvesm list ceph
file /etc/pve/storage.cfg line 36 (section 'ceph') - unable to parse value of 'authsupported': unexpected property 'authsupported'
ceph:vm-105-disk-1 raw 17179869184 105
ceph:vm-105-disk-2 raw 68719476736 105

storage.cfg section:
rbd: ceph
monhost 172.16.100.101:6789;172.16.100.102:6789;172.16.100.103:6789
pool rbd
username admin
authsupported cephx;none
content images

add rbd storage by gui,no authsupported option in the storage.cfg

# pveversion -v
pve-manager: 2.3-10 (pve-manager/2.3/499c7b4d)
running kernel: 2.6.32-18-pve
proxmox-ve-2.6.32: 2.3-88
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-18-pve: 2.6.32-88
pve-kernel-2.6.32-16-verycloud: 2.6.32-82
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-4
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-36
qemu-server: 2.3-13
pve-firmware: 1.0-21
libpve-common-perl: 1.0-48
libpve-access-control: 1.0-25
libpve-storage-perl: 2.3-3
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.4-6
ksm-control-daemon: 1.1-1

Hi, this option has been removed in last pvetest (wiki not yet updated),

authentification detection is auto now.

if you have a keyring file, it'll be cephx , if not none.

So you can remove the option.

 

[lynn_yudi]

Hi, this option has been removed in last pvetest (wiki not yet updated),

authentification detection is auto now.

if you have a keyring file, it'll be cephx , if not none.

So you can remove the option.

thks, very done!

 

[spirit]

thks, very done!

I have updated the wiki