My use case is to boot the same OS with different GPU on demand.
The proxmox box I used at home also serves as my desktop. There are 2 nvidia GPU installed and I would like to easily boot the same os with different gpu on different usage and keep idle one for another linux box running some...
The requirement is to install the module that I could use it in container. However, I have searched lots of post and did not find any source that is available to do it under pve.
I am running 6.5.13-1-pve, any suggestion? Thanks.
<-- ubuntu sample-->
apt install linux-modules-extra-`uname -r`...
I have AMD 3900X with nvidia GTX1080 passthrough to one of the VM for desktop purpose. It is not as responsive as native but it is fine.
But the kernel keep using at least 2.2GHz as minimum speed making power consumption goes up.
After using newer kernel and amd pstate scaler, it is able to...
I have an old SSD installed with promxox 7.1 for non-production use. And the ssd seems failing and sometimes goes offline and need a hard reset to fix it.
It is the boot volume as well as the local/local-lvm of some 10 vms. I would like to explore the easiest way to get this ssd replaced.
In...
my set up was to passthrough the m2 ssd to my major vm.
but it prevent me to start vm after I stopped it, with following error:-
[224495.954313] pcieport 0000:00:01.1: AER: Multiple Uncorrected (Non-Fatal) error received: 0000:00:01.1
[224495.954331] pcieport 0000:00:01.1: PCIe Bus Error...
some windows guest has experience bsod sometimes when passing through AMD onboard audio. Whether or not having ACS enabled in kernel behaves the same.
After bsod, the VM can no longer locate the audio device even after reboot of the VM.
My VM has the primary VGA (nvidia GTX1080), audio (AMD...
I encountered error on a very basic operation.
I created a zfs pool and created thin provision VM disk image on it.
After some testing, I decided to remove the disks but show "dataset is busy"
The storage is only being used for VM disk image. i.e. No iSCSI, No container.
I tried reboot...
Is it normal to have a node reported usage of 85GB, while the total VMs + LCX memory usage sum to 40GB?
I got these information from the summary under the DataCenter which has a single node only. Where I can have more information on physical memory assignment?
I have around 10 VM + 4...
I set up a VM for live streaming on youtube.
Since no hardware GPU, I uses software h264 encoding which is fine.
On the audio side, if I have a console (SPICE) connected, everything goes very well. However, if this SPICE client is disconnected, audio will goes shutter.
Doubling CPU / RAM make...
I am using latest PVE on my ryzen platform with B550 chipset. I have my usb 3.x controller and onboard audio passthrough together with the single gpu.
It is very strange that randomly my VM will not boot (or need to wait for like 5 mintutes to boot), until I remove, and re-add the same usb...
I have no problem to get my nvidia to passthrough to windows VM.
my host will boot with proxmox menu and commandline, but as soon as I start the windows VM, it will take over the GPU and the monitor will then boot into windwos.
However, the nvidia seems acting weird with performance. for...
I need to run a script that require the kernel module inside the container. I follow another thread to run the following in the host.
pct set 204 --mp0 /lib/modules/$(uname -r),mp=/lib/modules/$(uname -r),ro=1
But after running the 204 container no longer boot.
/var/log/message shows:-...
I tried to passthrough the Windows MR (Samsung Oddessy Plus) to my Windows guest machine
Long story short, passing through the entire pci is NOT an option in my case.
The windows machine with GPU (nVidia) pass through and 2 USB 2.0 devices set in conf. Which is the mouse and keyboard.
When the...
I have installed PVE 6.2, and started a ubuntu 18.04 vm. The ubuntu installed with asterisk and 3g dongle drivers and attached 5 usb dongles.
But the systems will halt without any warning and the console will lost.
Even reset cannot be done.
TASK ERROR: VM 305 qmp command 'system_reset' failed...
I tried to passthrough a pcie device (USB 3.0 controller) to a vm but failed and resulting a crash to the host. It should have automatically reboot but since then I cannot find the pcie device anymore with lspci.
The vm in question reported fail to start because the pcie assigned is missing...
My config is as following
CPU: AMD 3900x
Chipset: B550
SSD: 2x Samsung 1TB NvME on board @ PCIe 3.0
Proxmox 6.2 System Disk: 750GB SATA SSD
I am now running Proxmox with a guest OS win10 and passthrough the single GPU (GTX1080). The windows system is now sitting on one of the 1TB Samsung...
I managed to set up win10 guest under PVE6.2 and wanted to host some emulator which requires nest virtualization.
After searching from forum, I need to add args: -cpu host,+svm in the conf file.
Then I reboot the GTX1080 stopped working. It still display video on screen but with like 640x480...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.