UPDATE
Issue seems to be related to the 6.1 Kernel opt in and 4Kb sector sizing on the NVME. Another system with 512b sector sizing works fine on the 6.1 kernel and reverting this machine 5.15.85-1-pve causes storage to go back to working.
ORIGINAL
After PVE updates, VMs running on a specific...
I have a relatively small nvme Ceph cluster running on a dedicated 10gb network. RBD and CephFS performance seems to be pretty good at around 500MB per second in various synthetic benchmarks. Performance uploading a 16gb test file to S3 (RadosGW) from a VM is terrible at only 25MB or so...
Trying to figure out if this a bug or just a misunderstanding on how live migrations are supposed to work with the latest enhancements. I'm on the 7.1-10 release and I'm trying to live migrate a vm from one node to another. When you do a live migrate it gives you an option to use a different zfs...
After patching this morning eno3 and eno4 disappeared on one of my Dell R720. The card is based on the BCM57800 chipset and has two SFP+ and two gigabit ports on the same card and was working prior to this mornings update. Not really sure what to check. Commands like "ip link show" no longer...
One of my PVE nodes is failing to start networking on reboot despite having identical configuration as other working nodes. I've seen https://forum.proxmox.com/threads/proxmox-6-network-wont-start.56362/ but I'm not sure why you'd want to mask the service . If I restart ifupdown2-pre.service the...
I'm trying to get Promox PAM Authentication working against FreeIPA. I've joined the Promox nodes to FreeIPA and I'm able to ssh into each of the nodes using both my password and ssh keys from FreeIPA. What seems to be going on is the order of operations in the PAM modules.
Here are two...
Testing out disk passthrough to a VM from a SAS HBA and I'm noticing a 50% reduction in speed from writes on the Promox Host vs the VM. This is with the default no cache option as I'm trying to test out direct sync speed.
pve-manager/6.2-4/9824574a (running kernel: 5.4.34-1-pve)
Here is my VM...
Trying out the new DNS Challenge and the UI appears to be missing something. For some of the plugins you get vendor specific fields to fill out but if you pick "dgon" all you get is a box called "API Data:" with no details on how your supposed to fill it out.
So far I've tried just putting my...
I'm trying to figure out if it's possible to add the CPU flags sse4_1 and sse4_2 when your using the default kvm64 cpu type? OPNSense complains about the lack of SSE4_1 when I enable the AES flag. If I pick the host cpu type AES works correctly but for some reason OPNSense routing performance is...
The documentation at https://pve.proxmox.com/wiki/Firewall seems to indicate that "If you enable the firewall, traffic to all hosts is blocked by default. Only exceptions is WebGUI(8006) and ssh(22) from your local network." ports 8006 and 22 are allowed by default when enabling the firewall. On...
I created a test VM using VMWare Fusion 11.5 with VM Passthrough Enabled and two 20 GB disks. Despite choosing RAID1 and /dev/sda and /dev/sdb during installation my zpool only has /dev/sda. According to https://pve.proxmox.com/wiki/ZFS_on_Linux#_bootloader raid1 zfs for boot should be supported...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.