The uptime in the GUI shows the wrong uptime for the vms and cts.
For example i have a vm with about 250 days uptime and proxmox is reporting 3 days uptime. 3 days ago i installed the last 5.x updates and rebooted all hosts.
Any ideas how to get the correct uptime?
Ich habe mehrere NFS Volumes im Proxmox Cluster gemountet.
Angenommen ein Volume läuft voll.
Was passiert dann mit den LXC Container die auf RAW Images liegen? Sind die Images dann korrupt? Gibt es eine Panic oder sind die Container dann auf RO?
Hello,
we like to build up a new cluster distributed over two datacenters. We use a NetApp Metrocluster and connect the storage with NFS. So storage is no problem.
In normal situation there should be at least 3 nodes. How many nodes are needed in a cluster distributed over two datacenters...
Which is the correct way to change the mtu of a bridge or a internal port to mtu 9000?
I can set the ports in the bond to mtu9000 but not the bridge or the vlan.
ovs-vsctl set int vlan50 mtu_request=9000
or
ovs-vsctl set int vmbr1 mtu_request=9000
does set the request size but mtu is...
The new Proxmox 2.0 is in beta3 state. In this state i will not use it in a production system.
On the other site debian anounced that in two month there will be no more security updates. http://lists.debian.org/debian-security-announce/2011/msg00238.html
I will not run any system without...
I setup a new Proxmox server. Now i tried to do a vzdump but i got following error:
zdump --quiet --node 1 --snapshot --compress --storage Backup --maxfiles 1 --mailto server@hec-tech.net 105
105: Oct 18 16:03:01 INFO: Starting Backup of VM 105 (openvz)105: Oct 18 16:03:01 INFO: CTID 105 exist...
I installed a new server with proxmox 1.9
pmx-00:/vz# pveca -cmissing ip address for node '1'
pmx-00:/vz# pveversion
pve-manager/1.9/6542
pmx-00:/vz# pveversion -v
pve-manager: 1.9-24 (pve-manager/1.9/6542)
running kernel: 2.6.32-6-pve
proxmox-ve-2.6.32: 1.9-47
pve-kernel-2.6.32-6-pve...
I tried to create a cluster but i got following error:
Can't locate PVE/I18N.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at...
Today i run an apt-get update && apt-get dist-upgrade and then proxmox has a broken package.
Setting up pve-cluster (1.0-8) ...Starting pve cluster filesystem : pve-clusterfuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
(warning).
invoke-rc.d...
I need to setup a new proxmox cluster. Does it make sense to install proxmox on a small array like 2x 72GB 15k harddisks in raid1 and the vms in an 6x 1GB 7.2k harddisk on a raid6?
If yes how do i this the best way? Do i need lvm also for the data array? Has anybody any experiences with hp p400...
I run a NFS Server on one Proxmox node. In a KVM i need to mount the nfs share. At this time all worked very well but the performance is very poor. The write rates about 30-60MB/s. Write rates native on the kvm at 400MB/s. Which networkdriver for the kvm has the best performance?
pmx-00:~#...
I got following error:
Log of fsck -C -R -A -a
Mon May 16 19:54:19 2011
fsck 1.41.3 (12-Oct-2008)
/dev/pve/data: Resize inode not valid.
/dev/pve/data: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
/dev/sdb1: clean, 42/131072 files, 109608/524288...
After i upgraded to 1.6 and to the kernel version 2.6.32-3 one of my server will not boot
With the old 2.6.24 kernel i can boot without any problems
At the boot i see the message that there are no volumes found.
lspci:
00:00.0 Host bridge: Intel Corporation 5000P Chipset Memory Controller Hub...
is it possible to load non iptables modules inside a vm?
i need ip_vs modules but i dont know how to load them inside a vm
in the /etc/vz/vz.conf i can only define iptable modules
i hav two interfaces for some containers one for internal network and one for external network
my problem is that the extern interface gateway is the modem of my isp and the internal is my firewall/routing server
so i need two routing tables
i tried this with two routing tables
the problem...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.