Hi Guys,
I have one node of a 6 node setup which has a weird network issue.
The time server will not sync. The NTP pool list is the same as on the other nodes.
timedatectl status
Local time: Tue 2021-10-05 12:37:11 AEDT
Universal time: Tue 2021-10-05 01:37:11 UTC...
Hi Guys,
any idea what might be causing this
I think it is related to my previous post.
I assume something is weird on my network settings
thanks
damon
Hi Guys,
Proxmox 6 has worked fine for years.
Router is port forwarding the same a before
Updated to proxmox 7 from proxmox 6 (not fresh install)
I can access the GUI via the LAN i.e. https://192.168.0.xxx:8006
but not via the WAN https://www.xxx.com:80xx
which I could before.
Is there...
Hi All,
I set autoscale to on on my ceph pool.
but nothing has changed.
should it not automatically (possibly over time) change from 128 to the optimal 256 value?
It has been a few days.
thanks
Damon
Hi All,
this is partly for me in case I forget but also for other windows users.
Sometimes when you migrate a VM from one node to another it will give you a BSOD normally straight away but it might take a few minutes
When you get a BSOD on a windows VM you might have noticed the CPU goes to...
i have posted it on the other forum but I think the root cause might be the PBS
https://forum.proxmox.com/threads/all-nodes-and-vms-have-a.77289/
thanks
damon
all the VM's are running.
I can use a remote access to log into the VM's and the applications running on the VM's are responding.
any idea how to fix it, preferably without rebooting the nodes?
thanks
damon
I have a PBS setup at location A which also has all the VM's on the same network
I have PBS set up at location B which is where I would like to sync the datastores from PBS A to PBS B
on PBS B I have set up the remote as being PBS A
Port 8007 is forwarded
when it runs it returns these...
just a thought.
could you upload via local media a copy of the initial VM.
Similar to CLONE but CLONE to USB
then take the USB to the BACKUP machine and UPLOAD the initial VM via UPLOAD etc... .
On the local network it took about 10 minutes on 10GB LAN but WAN, I expect it to take a quite a...
if you know less about Linux
try this
in the BACKUP GUI (the one https:/192.168.0.xxx:8007) you click on
DISKS
ZFS
Create ZFS
you select a drive
You enter a name for the drive using the standard rules - don't start with a 12345 etc.
remember the name you give it will be used below - don't...
HI Guys,
gentle warning
If you have Windows 10 Vm which is about to update to version 2004 you should take a snapshot now
I have found that 6 of 7 update fine but the others get stuck in a endless loop between
the Proxmox Bios Boot ( the screen with ESC for boot options) and then next page...
After running CEPH for a year, I decided to replace a node as the performance was not what I expected. (Two days later, insert multiple expletives, one less keyboard and a few grey hairs)
First thing - double check you have put in the right network card.
-> those 2x 10GB look very similar to...
Hi All,
this just happened to me and I hope the solution will help someone one day.
Problem:
Due to a power cable failure a node when down (turns out it was a crap cooler master Power Supply).
All but one VM use a shared storage like NAS or Ceph.
The one which uses a local drive on Node 1 was...
Hi Guys,
I have a 4 node Proxmox setup each node has 5 or 6 Windows 10 VM's on it.
Everything works great except they cannot ping each other with any certainty.
I might get 0 of 4 replies or 4 of 4 or as shown below 2 of 4.
This is from a VM on node 2 to a VM on node 1
If I go to node 1 and...
HI Guys,
I know how to fix it but am wondering why it happens.
when I reboot a node or nodes for an update everything works perfectly.
However, once it is done I always end up with a few of these
Possible data damage: 7 pgs recovery_unfound
pg 1.12 is active+recovery_unfound+degraded, acting...
Yesterday I noticed one of my nodes was down for no apparent reason.
In the server room there was a loud fan noise.
Our Node 4 looked to be on but when I used the KVM to view the screen it told me it had crashed.
I rebooted it and went into the BIOS and noticed the CPU temperature was well over...
HI All,
simple set up 3 nodes each node has 1 SSD and 1 HDD connected via 10GB network.
I stutdown (via GUI) and moved one node from one location to another with a down time of about 15 minutes.
I had moved all the VM's from that node to other nodes.
When I started the node it all seemed to...
done something bad again.
-Prox 6.0.4
when I click on the contents button for my ceph storage all I get is this window appearing.
rdb list shows me this
any ideas what I have done? The ceph itself works fine for storage.
thanks
damon
Hi All,
either I have mucked up something or I have the wrong information.
I have created a 3 node CephFS and i can upload ISO's to it but I cannot createe a VM and use it for the disk image.
I thought Ceph could be used for disk images?
Am I wrong?
If not then is there someway to add "disk...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.