Search results

Hello Hitmare, I would recommend to you taking a look into this thread and into this thread, maybe these tips help you solve your issue! All the best!

I can confirm that the solution from tonci worked for me as well, I wrote everything that solved my issue right here!

Hey guys, I had the same issue, that all my containers would not start anymore, sometimes they threw errors, sometimes they just said starting ok but did not start, but what worked for me were the following steps (involves a bit of a downtime)(Thank you to tonci, you really helped me out!)...

I have found this official documentation, but it is possible that this is the "old" way: https://pve.proxmox.com/wiki/ZFS:_Tips_and_Tricks#Replacing_a_failed_disk_in_the_root_pool

Ok, regarding to this document, if you use EFI, you might need the pve-efiboot-tool method, and if you use BIOS, you need grub-install... I will test if both work at the same time, but I see no reason why it shouldn't work.

I have found some posts regarding this problem, see here: https://forum.proxmox.com/threads/proxmox-zfs-mirror-install-with-one-disk-initially.53601/post-261614 https://forum.proxmox.com/threads/different-size-disks-for-zfs-raidz-1-root-file-system.22774/post-208998 I have also written a...

Has nobody done this ever before?

It seems like the described problem does not occur when SSL/TLS is used, so I don't have this problem anymore. Thanks for this guide!

I have tried this and struggle with the problem that my proxmox runs behind a dynamic IP which is on many blacklists. So even though everything is configured right, I get rejected from the mailserver. Is there a way to configure postfix as MUA and not as MTA? So that it would work with dynamic...

Hello everybody! I had an strange situation this weekend and was wondering if there would be a "right" way to to what I did. I have an server with only one SSD as boot drive, which was installed with ZFS by the proxmox installer. This was arround 6 months ago. This weekend, I added an second...

What do you mean with that? Our problem is that we do not have place for another switch for the cluster-traffic (what i referred to as corosync), so I would like to make it Full Mesh like here: https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server I just don't know if that's a good...

Hello there, We want to build a Proxmox-Cluster with 3 nodes, Ceph is used as hyperconverged storage. We will use 3 Dell PowerEdge R710s for this, with an SFP+ Card installed (2 Ports), and an HBA-Adapter instead of the iPERC/6. I still have some unanswered questions regarding this setup, tips...

That works, thank you! But I have set up this image in the past and do not recall to ever have done that. Was there a change recently? Is it because of the tun device of openvpn?

Hey there! I wanted to create an OpenVPN-Turnkey-Container, but it always fails (I tried different CT-ID, different storage). Here is the log: extracting archive '/var/lib/vz/template/cache/debian-9-turnkey-openvpn_15.1-1_amd64.tar.gz' tar: ./var/spool/postfix/dev/urandom: Cannot mknod...

There is no error when connecting to the second node. Do you mean the command called SendEnv LC... and AcceptEnv LC...? Only on the second node, the command AcceptEnv was commented out, and after uncommenting it, it works now, thank you. Did I comment this myself sometimes or is this not...

OK i just discovered something. I have an Proxmox Cluster, and I created the VM with the IP from an different node than where the VM is running. When connecting to the exact machine where Windows is running, i can connect via noVNC.

Hello, i just tried another tutorial, and I haven't had any success yet. The machine always starts up without any error, but noVNC just does not connect to the VM. I have tried numerous configurations now, different architectures, UEFI and BIOS, but I still have no success. It would be really...

It says OK, you can take a look at the screenshots

Can anybody help me please? I've watched various guides, and they all just start the VM and noVNC works without Problems... And I still have no idea why it does not work for me...

Hope you mean this pieces of information. agent: 1 bootdisk: virtio0 cores: 2 cpu: qemu64 ide2: local:iso/Win10_1803_English_x64.iso,media=cdrom memory: 4096 name: Win10-Jump-Server net0: virtio=F6:C6:40:95:7F:29,bridge=vmbr0 numa: 0 ostype: win10 sata0...