While doing a backup to an NFS mount I am shown
INFO: starting kvm to execute backup task
INFO: started backup task '7325d51d-bb44-4522-a72f-078cf08de2ce'
....
INFO: status: 6% (6646923264/107374182400), sparse 5% (5877727232), duration 57, 1238/0 MB/s
Is it safe to assume that the share is...
Is there by chance a "how to set mtu for dummies" guide?
I did some searching - found some perl code - in the forums - some referenced back to 1.x etc...
Sadly searching the forums since 2.x is out has been a bit more difficult
that being said here is what I need to figure out.
We have a...
We migrated some VM's in a cluster around the other day - and now we cannot pull up the RRD stats.
any thoughts?
we ran /etc/init.d/pvestatd restart
but the next day nothing.
# pveversion --verbose
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-11-pve...
While trying to do a backup We are getting a strange error:
trying to remove stale snapshot '/dev/pve/vzsnap-xanadu-three-0'
INFO: umount: /mnt/vzsnap0: not mounted
ERROR: command 'umount /mnt/vzsnap0' failed: exit code 1
when running mount I see:
mount
/dev/mapper/pve-root on / type ext3...
I have spent some time searching online for this answer - but to no avail - so here goes.
I went to transfer container # 106 which was using local storage to another host node.
The configuration file migrated just fine - BUT NOT THE STORAGE
Now - I have storage on 1 system and the...
In Proxmox VE 2.2 is it possible to disable VZQuota for something that once ran a quota.
I have set Quota to ZERO but even so - when the system reboots (not clean) it goes into a vzquota check.
While its great to have quota's this VM does not need it and the clients hardware is having some...
I hope this finds everyone well.
I am trying to find what is the best way to install Proxmox onto a drive array that has over 2+TB of storage.
I have a bunch of 3TB Drives that I would love to install Proxmox onto.
The hope is of course to use my ISCSI raid array for the actual VM's however...
AlienVault Open Source SIEM (OSSIM) is a complete Security Management solution that detects and profiles attacks, and provides a comprehensive, intelligent Security Management platform and toolset.
The entire solution is composed of open source distributions including all seamlessly...
After reboot the network interfaces are not found.
I was able to find 1 by going in and editing /etc/networks/interfaces and changing eth0 to eth2
restarted network and voila - worked...
however now - it does not
any ideas - as this is getting tiresome...
i have 4 vps down on this node...
I have tried a few things - but sadly I am not able to figure out how to mount two 4TB drive arrays ...
Any ideas?
I have thought about breaking them down to be smaller - but we would loose the ability to have a raid 60 array that way
Please advise.
There is a simple way to install an IP Calculator @ the command prompt for Debian users.
# apt-get install ipcalc
I am thinking a simple cgi-wrapper like here: http://jodies.de/ipcalc_cgi
would work wonders - pretty easy to add - and might help when folks are looking @ subnetting on their...
I am looking into writing a module for a common billing system so that we can setup auto-creation of vps'
We are looking for what the actual commands are (since i have not seen an api as of yet) that can be used to create these
In short - we would be using the canned openvz templates
most...
Unable to upgrade
seeing the following:
dpkg: error processing pve-manager (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve:
proxmox-ve depends on pve-manager; however:
Package pve-manager is not...
Those that are looking for a simple how-to for making an opensource iscsi -
this might help http://www.hostmedic.com/admin/storage/san-wo-the-cost-centos-iscsi/
Also - has anyone drooled over this bad boy? 67 terabyte 4U server self built for under $8K I think its amazing - and of course...
ERROR: CFG Error in "workdir", line 8: Working directory /var/www/mrtg does not exist
After upgrding a system to 1.3 we are seeing this error every 5 minutes from cron.
not sure if its something new - figured I would ask here -
google shoes some ubuntu issues - (debain based as well )...
We are using an Adaptec Raid Card (3105)
8 Core Xeon Server
We have 8 drives connected in Raid 50 (Seagate 7200Sata)
The IO Load when doing a backup however we are seeing IO Load over 70% at times
On another system I tried to configure differently -
set each drive up in a new array...
I recently added 2 systems together in a new cluster
the issue is - there now are vmid 101 on both servers
how can I change one of those - so we can do live migrations ?
searched the wiki - but no result :-(
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.