Search results

Hallo, ich hatte ein ähnliches Problem, ebenfalls auf einem HP DL380 G6 mit einem Smart Array P410i. Bei mir war der Cache vom Raid-Controller ausgeschaltet. Falls das Problem weiterhin besteht kann ich eine kleine Anleitung schreiben wie man den Cache aktiviert.

Hello, what happens if you set it to off: intel_iommu=off or do you really need to pass through these two NICs?

I tried different bonding modes, but after every reboot I ended up with round-robin. After googling a bit I found this advisory from Hewlett Packard: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03001127 I looks like the modules must be loaded in a proper order, so I adapted the...

Tonight I've upgraded the IOS from the very old 12.2.55-SE3 to the suggested 15.0. This change didn't solve the problem. Could it be a problem with the used Broadcom NICs? # lspci | grep -i ethernet 02:00.0 Ethernet controller: Broadcom Limited NetXtreme II BCM5709 Gigabit Ethernet (rev 20)...

Tomorrow I've activated the subscription of the machine, updated all the packages and performed a reboot. With this line in the /etc/network/interfaces file: bond_mode 802.3ad The interfaces weren't bonded together after the reboot. I simply restarted the network with: /etc/init.d/networking...

Right now I'm using the No-Subscription repository. Next week, as soon as I receive a subscription key for this machine, I'll try with the packages from the enterprise repository.

What I meant is that the config looks OK. In the mean time I did a little change on the linux machine, I replaced the line: bond_mode 802.3ad to bond_mode 4 and after restarting the network I have: # cat /sys/class/net/bond0/bonding/mode 802.3ad 4 and on the switch: #show etherchannel 2 summary...

The etherchannel looks OK on the switch: show etherchannel 2 summary Flags: D - down P - bundled in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 U - in use f - failed to allocate aggregator...

Hello, I've installed Proxmox VE on a server with four Broadcom BCM5709 NICs and configured the bonding via the webinterface. The /etc/network/interfaces looks like this: auto lo iface lo inet loopback iface enp2s0f0 inet manual iface enp2s0f1 inet manual iface enp3s0f0 inet manual iface...