Search results

Hi, One of our pves refuses to upgrade from Proxmox 7.3-3 to 7.3-6: apt dist-upgrade returns a 'corrupted double-linked list' error, followed by a number of packages that are seemingly not (or no longer) installed: oot@ci-px5:~# apt dist-upgrade Reading package lists... Done Building...

Hello all, I have configured my proxmox 7.0 host bridge to be vlan-aware. I can set up vms in different vlans and it works flawlessly, so long as the vms have only 1 NIC. When I set up a VM to have 2 NICs, in 2 different VLANs, the vm become only reachable from its vlans, other vlan users get...

Hey all, I'm trying to back up /etc (on the hypervisor) to pbs through cli : /usr/bin/proxmox-backup-client backup etc.pxar:/etc --repository prox1.mydomain.com:Backups The backup works well, except for /etc/pve -- which is empty. If I run the same command specifically on /etc/pve ...

Hello Forum, I cannot re-add an osd to Ceph, getting the following error message: auth: unable to find a keyring on /etc/pve/priv/ceph.client.bootstrap-osd.keyring: (2) No such file or directory I have found and read a number of posts relative to this issue, and tried to apply the offered...

Hello, My 3 ceph monitors (v 15.2.14) have all crashed after their store.db have all become corrupted, to the point the only way I could see out of this was to destroy and re-create those monitors from scratch. The OSDs have been untouched since the crash, they stand in the state they were in...

I need to manually rescue a PBS storage, unfortunately. I was able to copy the vm folder, which gives me the list of the different backups for a given vm. How can I identify the underlying chunks, in an attempt to restore one backup, even if not the latest?

Hello, Is it possible to import existing storage disks into a new pbs install? I have had a crash on my existing pbs (vm in a ceph environment). I can create a new pbs vm and give it the virtual drives storing all the backup data. How do I then import those data into the new pbs instance...

Hello, I have undergone a severe crash of my ceph cluster, due to electrical problems. I have partially succeeded in recovering most of the data. Unfortunately, some of it seems unrecoverable: :~$ sudo ceph health HEALTH_WARN 1 MDSs report slow metadata IOs; Reduced data availability: 27 pgs...

Hello all, We have been successfully running a 5-node ceph nautilus cluster for a while, on Proxmox 6.4. We have unfortunately undergone a serious power failure which crashed the ceph, 5 of the 27 osds being ejected from the cluster. These could only be reinserted after having been destroyed...

Hello all, We are experiencing what seem to be random reboots on our 2-node cluster. Node 1 has 144 GB of RAM + 128 GB swap, and is hosting a single Windows VM with 128 GB of RAM (no ballooning). Node 2 has 256 GB of RAM + 256 GB swap, and is hosting a single Windows VM with 230 GB of RAM (no...

Hi all, In a 5-node cluster with 3 VLANS (prod, corosync, ceph) with all VMs living on CEPH, if a node loses connection to CEPH (but prod and corosync are still UP), VMs that are hosted on that node are not automatically migrated by HA. I have to manually stop the VMs on the node, manually move...

Hi, Browsing host archive is easy as clicking the Browse icon in the GUI. However, that icon is only accessible when the archive is created with no encryption. Is there any way to browse an encrypted archive from the browser, providing it with the backup.key one way or the other?

Hi, I have this machine already running proxmox 6.3 ( :8006) on which I have installed PBS ( :8007). I cannot add any dedicated disk to the machine, and the only room that is available to me is in /var/lib/vz (ext4, not zfs). I have declared the Datastore in the :8007 end of the server, and...

Hi all, This used to be a non-issue, only this time around with proxmox 6.2, things are not so straight (at least for me). I need to install Proxmox 6.2 as a VM inside a Promox 6.2 hypervisor, to run a series of tests. I cannot seem to get a network connection. In the past, I did this a number...

Hi all, We are going to add ODSs to our current CEPH (nautilus 14.2.10). CEPH currently holds 20 disks on 5 nodes, and we are adding 10 more OSDs. My question is, which is better? Adding one OSD at a time, and wait for re-balance before adding the next one? Or adding all 10 OSDs all at once at...

Hi everyone I removed and destroyed all of my OSDs, in order to re-add them differently. Some OSDs got destroyed properly and are available to be added back into a new CEPH. Other disks are not available, due to a partition remaining on the drive : $ sudo lsblk /dev/sdb NAME...

Hi all, We're setting up a Proxmox 5.2 on a supermicro X11SSH-LN4F, which is an intel i210-at based Quad LAN motherboard. We're having an issue with the LAN ports -- if only 1 port is connected things run along fine, but as soon as we want to use 2 or more ports, things act goofy. Proxmox 5.2...

Hello everyone, We're looking into building a new server running Proxmox 5.1. Any experience with a Ryzen 1700 or 1800? I read about stability issues with Proxmox 5.0 and thermal sensor reading problems. Are those resolved with Proxmox 5.1? Any other thoughts worth sharing? We're considering...

On 1 server (running proxmox 4.4), we lost all of our NICs (all 5 of them), which are no longer even seen by ifconfig (/etc/network/interfaces cannot be read). We booted the server with a live-cd and there, all NICs were working properly, could be configured and ping other machines on the...

On a proxmox 4.4 node running ceph jewel, osd.0 has suddenly dropped out of the cluster and has been stopped. I cannot get it to start again. Going through the different logs, I could trace a number of slow requests errors, which could have led to the exclusion of the osd from the cluster. As...