Hi Forum,
nach dem Update unserer PM-Knoten auf PM8 (Debian 12, OpenSSL 3.x) wird ein SSL-Zertifikate auf dem System angemeckert.
Pveproxy liest zwar das Zertifikat, aber zeigt im Browser nur noch:
Fehlercode: PR_END_OF_FILE_ERROR
Wir haben in /etc/default/pveproxy
DISABLE_TLS_1_2=1...
Hi Forum,
we use latest proxmox 7 and set the bond-mode in the web-interface to broadcast. /etc/network/interfaces contains bond-mode broadcast afterwards.
After rebooting the server, cat /proc/net/bonding/bond0 shows active-backup.
Checking /e/n/interfaces again, bond-mode broadcast is still...
Hi folks,
since years I'm using the following stanza in e/n/i:
auto vmbr0
iface vmbr0 inet manual
bridge-ports bond1
bridge-stp off
bridge-fd 0
bridge-vlan-aware yes
bridge-vids 100
auto vmbr0.100
iface vmbr0.100 inet static
address 192.168.1.11...
Hi folks,
on a specific Thomas Krenn Server (part of a 3 node cluster with ceph)
Manufacturer: Supermicro
Product Name: H11DSi-NT
Version: 2.00 with dual
AMD EPYC 7301 16-Core Processor
we see strange errors. corosync detects link failure and after that, a SSD reports...
Hi Folks,
we have a 3 node cluster with one independent ceph-ring that is directly connected between the 3 nodes. (N1->N2, N2->N3) with QSFP+ AOC-cables¹. Here we have very bad latency on ping tests.
The directly connected setup works flawlessly on other clusters. The only difference is we...
Hi ceph/proxmox experts,
I somehow remove an osd, where a pg was/is still active. How can i get rid of this error? :/
Reduced data availability: 1 pg inactive pg 1.0 is stuck inactive for 5d, current state unknown, last acting []
# ceph pg map 1.0
osdmap e65213 pg 1.0 (1.0) -> up [15,10,5]...
Hi folks,
I'm running a windows server 2019 and doing some benchmark to compress several mp4-video files into a zip-file with windows build in "compress" tool.
Monitoring the cpu usage shows that only a few cores are used and it's pretty slow.
Is this some kind of limitation due to...
Hi folks,
is there a way to have individual pruning settings on a per VM level on server-side?
Our proxmox systems only have backup permissions. No pruning rights.
We want to specify different pruning intervals for each VM.
Thank you.
Hi Forum,
mein HDD-Pool sollte bei einer Gesamtgröße von 213TB und 3 Replicas (default) eine ca. Größe von 70TB haben.
# ceph df detail
--- RAW STORAGE ---
CLASS SIZE AVAIL USED RAW USED %RAW USED
hdd 213 TiB 133 TiB 80 TiB 80 TiB 37.53
nvme 21 TiB 13 TiB 8.2...
Hi Forum,
7 Knoten Ceph-Cluster - letzte 7er-Version. Ein HDD-Pool mit ~ 40 OSDs. Brutto-Gesamtkapazität ~ 250TB.
Unter Ceph -> Pools - ist pg_autoscaling angehakt.
Dennoch steht bei Optimal # PG - need pg_autoscaler enabled.
Auch ein # ceph osd pool autoscale-status
liefert keine Ausgabe.
Das...
Hi folks,
I'm running a 4 node proxmox cluster with ceph with latest 7.1. No updates available.
One node fails to start pvestatd and some other services and ran in a timeout.
Dec 05 13:35:04 PX03 systemd[1]: Started PVE Status Daemon.
Dec 05 13:37:54 PX03 pvestatd[2055]: got timeout
Dec 05...
Dear Proxmox/Ceph-users,
i have the strange problem, that two disks seem to use the same osd ID. This is a 3 node proxmox 6 cluster.
root@adm-proxmox02:~# ceph-volume lvm list
====== osd.19 ======
[block]...
Even though I'm well aware that consumer SSD/NVME should not be used, it is reasonable to try to get the most out of "cheap" disks when budget is limited. I made the following observation and would like to discuss the pro/cons of this tunable.
Model Number: SAMSUNG...
Hi,
we just put our first NVMEs in the existing proxmox 6 & ceph nodes. Unfortunately the NVMEs are detected as type SSD.
As we want to have a new pool with only the faster NVMEs, we can not distinguish the disks by type:
(ceph osd crush rule create-replicated ....)
What can we do?
thank you.
Hi folks,
we have several multi-node proxmox clusters. Sometimes we have to cold-start all nodes (full power outtake onsite) that causes a race-condition between VMs.
Servers start before firewall/domain controllers are up. (wrong network profiles on windows)
Application servers start before...
Hi,
proxmox 5.4-13
server 2012r2
Would like to add another disk and use scsi for it. Device manager shows device, but can not install drivers. Tried several ISO files.
Any ideas?
Thank you
Stefan
Hi folks,
anyone ever tried these kind of cards?
https://www.delock.com/produkte/G_89835/merkmale.html?setLanguage=en
We would like to use NVMe-cards in it.
Our boards support bifurcation.
Ideas?
Hi,
i have a strange behavior on my linux system and can not explain it. Help would be greatly appreciated.
host proxmox1 with a trunk/bond interface to Cisco-Switch.
proxmox1 has mgmt in vlan100 on same bond:
bond1.100@bond1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP...
Hi,
we just got hit by a bug with 4.15.18-10-pve Kernel and i40 10G network cards from intel.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1779756
Problem seems to be fixed in kernel version >=4.18.
Will 4.18 be available in proxmox in the near distance?
Any help is greatly...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.