Search results

Hi, When I put the ip of the node directly in the physical interface or in the vmbrX everything works fine, but when I pass this ip to vmbr.100 (see below) I lose the connection with the other nodes in the cluster and when I restart the node (despite the web interface loading ) I can't log into...

Hi, I'm having trouble making two subnets use the same NIC and being able to pass to the cluster nodes scenery: - 1 node with two NICs (one exclusively for public IPs - untagged; and another for private ips - tagged) - 5 node with one NIC (tagged) ** I don't have direct access to the switch...

Hi, i am restructuring our proxmox cluster network and i have some doubts and requests for suggestions that i expose below My scenario is as follows (1) two public IP ports (untagged vlan) on different servers (2) seven ports (tagged vlan) (3) I don't have direct access to the switch of (1)...

Hello, I'm trying to improve the management of our network and would like suggestions, tips...! We have an active proxmox cluster where the proxmox nodes have public ip; the virtual machines hosted in the cluster use public ip of the same vlan of the cluster I would like to adjust this and have...

Hi, I'm replicating two virtual machines (vm01 and vm02) from node A to node B. vm01 replicates properly, but vm02 doesn't complete the replication. vm02 has three hds. Apparently everything goes smoothly in the replication of disk-0, disk-1 seems to repeat the same piece of replication...

Hi, In the following scenario: A VM XXX from node A is replicated on node B. Then VM XXX is migrated to Node B and there are files and folders (for example "folder z") from VM XXX located on node A that have not yet been replicated to Node B VM. If the replication of VM XXX now located on...

Hi, one node A down, the vms were being replicated on node B. However, when viewing the replication through the graphical interface, the following message appears: invalid json data in '/var/lib/pve-manager/pve-replication-state.json' (500) the json file is corrupted: pst0 ^ D ^ K ^...

After upgrading from proxmox 6.0 to 6.1 the web interface of one of the cluster nodes, it no longer shows the total available memory (32 GB DDR3). Shows the 16 GB proxmox. But by the terminal I see 4x8 GB RAM. What may have happened? proxmox-ve: 6.1-2 (running kernel: 5.3.10-1-pve) pve-manager...

Hello, We use x2go and chrome remote desktop for VDI on the virtual machines that are on proxmox. We recently started using spice to access webcam through weaker computers (dualcore processors) that don't support good quality video conferencing. Everything is working perfectly (audio and...

Hello, We will get AMD Ryzen 7 (2700X) and 9 (3900X). I would like to know if the lack of integrated graphics affects anything in vm. The use of VDI spice/proxmox, x2go, chrome remote desktop will normally occur, correct? best

I'm enabling lvm-thin, but I had trouble following the proxmox documentation (https://pve.proxmox.com/pve-docs/pve-admin-guide.html#chapter_lvm and https: //pve.proxmox. com / wiki / Storage: _LVM_Thin) I did the following (first try): # fdisk / dev / sdb >> to format in LVM and have two...

I have 3 node of proxmox and currently each node has 1 vm. Everything is working perfectly, but I'm not understanding what's happening with "Dynamic Memory Management (DMM)". The node01 (figure01) is not using the DMM because it only leaves the RAM minimum enabled The node02 (figure02) is...

I'm having trouble on my network. I believe that the configuration in proxmox is correct, but the real machine (proxmox 5) does not connect in the internet. I've tried something and it did not work, any suggestions? /etc/network/interfaces looks like this: source /etc/network/interfaces.d/*...

Hello! We move a virtual disk from one store zfs (hd sata) to another (ssd sata). When we move, we do not discard the hd sata virtual disk. We had a problem with ssd sata, but we were unable to add the virtual disk again this hd sata as "unused". Any tips/instruction how to proceed? NOTE 01...

Hello, we have a cluster of proxmox 5 with four nodes in unicast (IPv4) and the syslog of the four nodes is appreciating the following message: ... corosync[1491]: alert [TOTEM ] Invalid packet data ... corosync[1491]: [TOTEM ] Digest does not match ... corosync[1491]: [TOTEM ] Received message...

Hello We have installed ZFS enabled in proxmox 5. We left image and container in storage "ZFS" and backup, iso and template in storage "Directory >> ZFS", ok? these two storage units share the same space, but monitoring the use of this space is not centralized, correct? For example, a zpool...

In the two links below it is shown how to enable installation and boot via NVMe PCIe: http://forums.debian.net/viewtopic.php?f=17&t=131613 http://www.poweredbyjeff.com/2015/10/29/Intel-750-SSD-in-Debian-Jessie/ Is it possible to do something similar using the proxmox live cd through advanced...

I reduced a partition of a virtual machine by the liveCD using Gparted -540GB (apparently OK) How do I reduce these -540GB on proxmox? Just edit the "/etc/pve/qem-server/10X.conf"? I tried using the command below, but it did not work: https://pve.proxmox.com/wiki/Resize_disks qm resize...

Hi, When I delete HD data from the virtual machine, the raw/qcow2 file does not reduce, correct? Is there any way you can do this? For example, (1) I created the virtual machine and put a HD 500 GB, the qcow2 file appeared with 50 MB - OK (2) then I put 100 GB (data) and the qcow2 file...

I read that there is a recommendation manually install debian install and pve on top of it, if you want to clone the Proxmox (https://forum.proxmox.com/threads/reinstall-proxmox-without-format.26221/#post-131672). But the clonezilla or dd command could not be used for this in a direct...