I have older server with sata ssd(intel s3510) and Epyc 3rd gen server with intel p4510. I have a budget for another server(4th gen epyc with nvme ssd).
I'm planning to build 3 node with ceph. If I mix those 3, would they bottle-necked by sata ssd server?
I will run database intensive...
Hello, I have created lxc and and storage type is "directory".
root@server:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 7.8G 3.8G 3.7G 51% /
/dev/loop1 3.6T 3.3T 132G 97% /storage
none 492K 4.0K 488K 1% /dev
tmpfs 16G 0...
I have some legacy code running on Ubuntu 14.04 LXC.
Since upgrading to Proxmox 7, my 14.04 container starts but doesn't even start up network interfaces and other apps.
If I manually enter to the container with 'pct enter' command and enter 'init 3', everything works.
It worked fine with...
My datacenter has disconnected my Proxmox host because it was causing MAC flood.
It has over 10 vm and wondering if there is way to check which VM is sending such requests.
Thanks in advance.
Hi, I've installed proxmox 6.1 on 2x Intel P4510 (ZFS mirror).
Upon successful installation, it reboots and stuck in initram console because there is multiple pool named rpool.
If I manually import my pool using ID, it boots fine.
How can I delete other pools named rpool.
I've tried rpool...
Hi,
I'm trying to do clean installation with 8x Intel P4510 on ZFS 10.
When I try to install following error shows.
I've executed dd if=/dev/zero of=/dev/nvmeXn1 bs=64MB count=10 on all drives.Still the same.
Can anybody help? Thanks
Helllo everyone.
I have Proxmox installed on top of Debian software RAID-10.
Today it froze and I restarted manually, unfortunately it doesn't boot due to mdadm error.
A. It gives following error on boot.
B. cat /proc/mdstat
C. blkid
What I find weird is boot error UUID doesn't...
I rent a dedicated server in remote datacenter and now hard disk is failing.
So hard disk is going to be replaced and old disk will be attached for few hours.
Since my storage is over 80% I can't backup my lxc container with biggest disk(about 3tb) on local disk.
For small containers, I...
I have configured two node cluster using web gui. I set up replication from pve1 -> pve2.
In cluster config I setup link0 as main link, however when I test it's using link1.
I downloaded 500mb file on virtual machine in pve1 and measured bandwith using iftop. It's definitely using link1...
Hello, I have been running 1U Xeon e5 2620 v4 CPU with 4 Sata SSD(Adata SSD 1tb SSD, very slow for ZFS:( ) configured on ZFS mirrored stripe. It run well for me but it doesn't have enough IO for my VM needs.
So I recently we purchased Amd Epyic 7351p with 8 NVME ssd (Intel P4510 1TB) to solve...
I have windows guest and after power cut, My Windows guest doesn't boot and gives BSOD. Then it entered to recovery mode. When write "list disk" in diskpart, it says "there are no fixed disks to show"
I have ZFS Mirrored Striped with ZIL without UPS.
Is there way to fix this?
Hello, My server crashed twice for last days.
Last message is
ACPI Error: AE_ERROR, While parsing command line (20181213/dbinput-1214)
Is this message related to crash?
Hello,
I have a windows 10 VM that I created about 3 years ago. I have allocated it single 2TB disk and uses about 40% of it.
I can't select "Discard option" somehow.
My host system runs 4x1tb SSD in ZFS (Striped Mirrored) which allows 2TB.
My ZFS pool show over 95% usage and I would like...
Hello,
At the moment I have 4 disk as follows:
rpool
mirror-0
disk-1
disk-2
mirror-1
disk-3
disk-4
Now that I need to add 6 devices I'm confused.
Should I add 3 disk each to existing mirrors? or should I create another 3 mirror with each having 2 disks?
What are pros and cons of...
Hello,
I have a server with E5 2620 v4, 64GB ram and 4x1tb mushkin Reactor SSD (I know it's consumer grade but it's in ZFS striped mirrored, aka raid 10). Overall I'm happy with performance but I still see 5-15% IO delay during peak load. CPU usage always around 20-40% and RAM is 80-90% all the...
Hello, I need to know what should be need to get best IO performance from the server. Guests are Linux container running PostgreSQL and Windows server 2012 R2 running MSSQL.
Here is my server specs:
CPU: Xeon E5 2620v4
RAM: 64 GB DDR4 ECC
First I've tried ZFS striped mirror (raid 10 equivalent...
Hello, Everyone.
My production server shutdown unexpectedly. Then when I rebooted my ZFS pool was missing and I imported manually. Proxmox boot up and VM are running fine. However, LXC containers are not starting.
Log file shows this.
lxc-start 1467859119.691 INFO lxc_start_ui -...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.