Search results

  1. H

    2 identical systems - one has duplicate id's found, other not

    Hi idk, we have to wait for 6.2.16-5-pve. Its already lined up, but hasn’t hit the repo so far.
  2. H

    2 identical systems - one has duplicate id's found, other not

    Alright, i have news on this case. After a brief discussion of the kernel devs, there is a patch which adesses the problem for all non-global-nsid nvme drives. https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=90b4622954d59078fa0cecad7e7baa48efd006e7 It doesn't...
  3. H

    2 identical systems - one has duplicate id's found, other not

    Hi fiona, i have already submitted a Kernel.org bugreport -> https://bugzilla.kernel.org/show_bug.cgi?id=217593 A Samsung employee has addressed the problem, and got a reply from his team internally, that there is no plan on releasing a new firmware for this model and the related models with...
  4. H

    2 identical systems - one has duplicate id's found, other not

    Hello, sorry for hijacking your thread. Since upgrading one of my hosts to pve8 i have a problem with 6 nvme disks (SAMSUNG MZ1WV480HCGL-000MV). This problem didn't occur with pve 7 (Kernel 5.15). dmesg gives me the following output: [ 5.575577] nvme nvme0: pci function 0000:04:00.0...
  5. H

    How can I configure Proxmox and pfSense vm?

    Okay, i can see the problem. Your Proxmox management ip settings are set on vmbr0. vmbr0 is your wan.... Set the following like described in post #21: Without proxmox gui you have to edit the /etc/network/interfaces: auto vmbr0 iface vmbr0 inet static bridge_ports eth0 bridge_stp off...
  6. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, lets work on the gui access. I need a photo of 'cat /etc/network/interfaces' on the proxmox host. I dont mean informations about the physical connection of your netgate router. What type of connection used it to connect to your isp over them wan-modem? What has your netgate...
  7. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, before we talk about VPNs, you should establish a basic configuration. First i have the following assumptions: 1. your server have 2 physical nics (NIC0 and NIC1) 2. NIC0 is solely connected to your wan modem? 3. NIC1 is connected to a switch, on this switch there are various...
  8. H

    How can I configure Proxmox and pfSense vm?

    You are welcome... Lets start to configure your preferred setup: 1. Empty the settings on vmbr0 in proxmox gui -> let the bridge-port on eth0 2. Set IP address:192.168.1.140 Subnet mask:255.255.255.0 Gateway:192.168.1.1 and let the bridge-port (eth1) on vmbr1 in proxmox gui 3. connect first...
  9. H

    How can I configure Proxmox and pfSense vm?

    Okay looks like expected in my previous post. Back to list of configuration steps: 3. check your pfsense virtual hardware config -> 1 vNIC on vmbr1 (WAN), 1 vNIC on vmbr0 (LAN) , note your mac addresses on these 2 interfaces 4. start the pfsense vm, in the vm-console there is an option to...
  10. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, i'm glad, that you regained the access to the host. There is no rule for the physical ports. The only rule is, that you know which port is connected to which network ;) kind regards hodo
  11. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, okay, then you can try to revert the changes you made to vmbr0. In /etc/network/interfaces look for the line: iface vmbr0 .... set the following: iface vmbr0 inet static address 192.168.1.140 netmask 255.255.255.0 gateway 192.168.1.170 -> reboot Then we could start...
  12. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, you said vmbr2 is on eth2 and eth2 is connected to your LAN Switch. Make sure your client is connected to the lan switch and you have an ip in the 192.168.1.0/24 subnet. With this settings set, you should access your proxmox host on 192.168.1.140. kind regards hodo
  13. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, your reply let me assume, that you want to have the pfsense VM with 192.168.1.1 on the lan side. Actual you have given the 192.168.1.1 address to the proxmox host. (on vmbr2) - not the pfsense vm What you need to do: 1. edit your proxmox network config and empty the address...
  14. H

    pfsense physical switch and vm isolation

    Hello, i would suggest, that you create another bridge on the proxmox host (vmbr3). Give the Pfsense VM another vNIC on the vmbr3 bridge. Configure the 10.0.30.x subnet as interface assigned to the new vNIC in the pfsense VM. Set your vm to use the vmbr3. Let your pfsense do the routing and...
  15. H

    How can I configure Proxmox and pfSense vm?

    Hello eiger3970, make sure you have set the following settings: 1. You need 1 vNIC in the pfsense VM for WAN connected to vmbr1. 2. You need 1 vNIC in the pfsense VM for LAN connected to vmbr2. 3. give your pfsense VM on the LAN-Side a free static IP in the 192.168.1.0/24 network. (Maybe the...
  16. H

    Virtio Driver Crashing High Load

    Hello, I tested the issue with the latest 0.1.160 driver. For me the problem is gone and i can achieve a steady iperf3 throughput of 6.5 Gbit/s. kind regards hodo
  17. H

    Virtio Driver Crashing High Load

    Hello, I recognized the same error on a windows2012r2 vm. Then i switched from the latest 149 driver to the stable 141 driver and the problems are gone!
  18. H

    Mellanox ConnectX-2

    hello grizzle33, your gateway adress is not a valid host adress. In your example it is the network adress. (first adress of 10.31.41.0/24 is 10.31.41.0...) Your hosts (proxmox and UnRAID) are in the same network. So you don't need a gateway for communication. Delete the gateway adresses on...
  19. H

    Help with networking model (concepts)

    Hello lpallard. short answer this time: Uncheck the boxes "vlan aware enabled" on the 444 screenshot.
  20. H

    Help with networking model (concepts)

    Hello lpallard, thank you for the explanation. With the information you provided i think the simplest solution is a VLAN separation on your switch. I take the following assumptions: 10 Port (Port 1-10) Procurve Switch (got from your drawing) 1 LAN-Net (192.168.0.0/24) 1 OPT-Net...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!